【Main Parameters】Input Voltage: 110V 60HZ; Automatic Temperature: 140℃-165℃ ; Vulcanizing area:100*85mm2;Length:295mm/11.61in;Height:410mm/16.14in;The diameter of the screw:27mm/1.06in; [Package Includes: 1 x Tire Repair Machine.] 【Sealed Tyre Repair】Large capacity, fully rotating C-frame accommodates different wheel sizes and allows for vertical or horizontal repairs. Vulcanizing repair process cures the patch and inner tire lining to form a dense, sealed repair job. 【Adjustable C-Frame Cavity】The tire repair machine possesses an adjustable, swing-open, rotating C-frame cavity simplifies tire loading and unloading while maximizing stability, the height tower also can be adjustable. 【Withstand High Pressure】Long-life Acme thread hand-wheel screw applies over 4000 pounds of pressure and heat for maximum adhesion of patch to casing. 【Widely Applicable】The tire curing machine can be applied to repair the tread, shoulder and sidewall of bus tires, light truck tires, passenger car tires, bus tires and commercial truck tires, etc.

Product Parameters

Materail: Iron+Aluminum

Input Voltage :110V

Automatic temperature:140℃-165℃

Vulcanizing area:100*85mm2

Length:295mm/11.61in

Height:410mm/16.14in

The diameter of the screw:27mm/1.06in

Weight:6.45kg/14.22lb

 

 

Features

1.Simple, one-man operation

2.Repairs tread, shoulder and sidewall

3.Large-capacity, fully rotating C-frame accommodates different wheel sizes and allows for vertical or horizontal repairs

4.Vulcanizing repair process cures the patch and inner tire lining to form a dense, sealed repair job

5.An adjustable, swing-open, rotating C-frame cavity simplifies tire loading and unloading while maximizing stability

6.Adjustable height tower

7.Contoured inner and outer curing heads conform to a variety of tire profiles

8.Long-life Acme thread hand-wheel screw applies over 4,000-lbs. of pressure and heat for maximum adhesion of patch to casing

9.Energy and cost efficient for lower operating costs

10.Lightweight, self-standing design offers portability and maximum stability

11.Doesn't require any time consuming tensioning straps

12.Handles long sidewall repairs

13.Cures both patch and plug at the same time

14.Curing heads can be operated individually or simultaneously for maximum repair efficiency

15.Constant controlled heating elements maintain optimum temperature

 

 

Tire Repair Method

1、Clean the surface of the wound where the tire needs to be repaired and mark it.

2、Use a grinding machine to grind the surface of the wound, the area is slightly larger than the wound。

3、Use the brush to raw rubber and gasoline blending good mortar (or hot glue) evenly coated on the polished.。

4、Cut the appropriate size of the rubber, it will fill in the wound,

5、Pressure the hot head on raw rubber (if possible can pad a thin layer of aluminum or iron in the raw rubber), try to put the wound in the central heating head, pressing screw, fixed tires.

6、 Turn on the timer switch and set it in the right place, Cold start can refer to "20" (Or adjust the vulcanizing time according to the temperature and the condition of the wound) the heat start time can be a little shorter，if you do not need timing can be set on the manual gear, then the hot head to work.

7、At the end of vulcanization, tire repair machine automatically cut off power supply hot head.

 

 

Packing List

1*Tire Repair Machine