MOTORIZED JOCKEY WHEEL FOR TRAILER POSITIONING – The Mini Mover 3 is a motorized jockey wheel that attaches directly to a trailer and uses a 12V electric motor to drive and steer during parking and repositioning, supporting controlled movement when aligning trailers in storage areas or confined spaces. HEAVY LOAD CAPACITY AND INCLINE PERFORMANCE – Designed to move up to 6000 pounds of rolling weight and support up to 1000 pounds of tongue weight, this electric trailer mover allows fully loaded trailers to be maneuvered on level ground and inclines up to 7 degrees. FORWARD AND REVERSE STEERING CONTROL SYSTEM – Powered forward and reverse operation combined with full steering control through the jockey wheel arm allows accurate trailer movement, while the 8 inch no flat adventure tread tire maintains consistent contact on pavement and firm ground at a travel speed of 26 feet per minute. FLEXIBLE MOUNTING AND 12V BATTERY CONNECTION – Installs to most trailer frames using clamp on or through bolt mounting and connects to a standard 12V battery using included 5 foot leads with a quick connect and ring terminals, supporting trailer frame heights from 15 to 30 inches. REMOVABLE DESIGN FOR TRANSPORT AND STORAGE – The motorized unit can be removed from the trailer by loosening two bolts when transport or storage is required, while the mounting clamp remains secured to the trailer frame for convenient reinstallation. The Novawinch Mini Mover 3 is a powered jockey wheel designed to move and steer trailers into precise parking positions without using a tow vehicle. Powered by a 12V electric motor, it attaches directly to the trailer frame and supports controlled movement during parking, storage alignment, and low speed maneuvering. Built to move up to 6000 pounds of rolling weight and handle up to 1000 pounds of tongue weight, the Mini Mover 3 allows fully loaded trailers to be maneuvered on inclines up to 7 degrees. It operates at a controlled travel speed of 26 feet per minute, supporting accurate placement when positioning a trailer into its final location. Forward and reverse drive combined with full steering control allows the operator to guide trailer direction through the jockey wheel arm. An 8 inch no flat adventure tread tire maintains consistent ground contact on pavement and firm surfaces during operation. Installation is designed to fit most trailer frames using clamp on or through bolt mounting. The Mini Mover 3 connects to a standard 12V battery using included 5 foot leads with a quick connect on one side and ring terminals on the other. Proper installation requires a minimum of 15 inches of ground clearance and supports trailer frame heights up to 30 inches. For transport, the motorized unit can be removed by loosening two bolts while the mounting clamp remains secured to the trailer frame, allowing convenient storage and straightforward reinstallation when trailer positioning assistance is needed.