MOTORIZED JOCKEY WHEEL FOR TRAILER POSITIONING – The Mini Mover 3 PLUS is a motorized jockey wheel that attaches to a trailer and uses a 12V electric motor to drive and steer trailers into precise parking, storage alignment, and maneuvering positions. HEAVY LOAD CAPACITY AND GRADE PERFORMANCE – Designed to move up to 6000 pounds of rolling weight and support 1000 pounds of tongue weight, this electric trailer mover maintains steady operation on level ground and helps move fully loaded trailers up inclines up to 7 degrees. FORWARD AND REVERSE STEERING CONTROL SYSTEM – Powered forward and reverse drive with full steering control through the jockey wheel arm lets operators adjust direction while an 8 inch no flat adventure tread tire delivers consistent traction on pavement or firm ground. FLEXIBLE MOUNTING AND 12V BATTERY CONNECTION – Installation fits most trailer frames using clamp on or through bolt mounting and connects to a standard 12V battery with included 5 foot leads featuring a quick connect and ring terminals, supporting trailers with 13 to 30 inches of clearance. 90° PIVOT DESIGN FOR TRANSIT – The Mini Mover 3 PLUS adds a 90° swivel that allows the motorized jockey wheel to rotate and remain mounted on the trailer during transit, reducing the need to remove the unit between uses. The Novawinch Mini Mover 3 PLUS is a powered jockey wheel designed to move and steer trailers into precise parking and storage positions without the use of a tow vehicle. Powered by a 12V electric motor and connecting to a standard 12V battery (battery not included), it provides controlled movement during trailer alignment, storage placement, and low speed maneuvering. Built to handle up to 6000 pounds of rolling weight and 1000 pounds of tongue weight, the Mini Mover 3 PLUS allows trailers to be positioned on level ground and maneuvered on inclines up to 7 degrees. The unit operates at a controlled travel speed of approximately 26 feet per minute, delivering measured movement and accuracy during placement. Forward and reverse drive combined with full steering control enables operators to guide trailer direction with confidence. The integrated 8 inch no flat adventure tread tire maintains consistent contact on pavement and firm surfaces during operation. Installation is designed to accommodate most trailer frames using clamp on or through bolt mounting. The Mini Mover 3 PLUS connects with included 5 foot leads featuring a quick connect and ring terminals to a standard 12V battery. Proper installation supports trailer frame heights from 13 to 30 inches off the ground. Unique to the PLUS model, the Mini Mover 3 PLUS features a 90° pivoting design that allows the motorized unit to rotate and remain mounted during transit, eliminating frequent removal and reinstallation between uses.