Specification:ACC mode input: 12.8V-36V；Qutput: 5V/3A；Surveilance mode input: 11.6V-36V
Qutput: 5V/3A； Extension cable: 3.5meter(11.5 ft) length Wide Compatibility OBD Power Adapter：The OBD power cable for dash camera fits various vehicles like Jeep Cherokee, Chevy, Toyota, Truck, etc. with OBD or OBD2 ports. The OBD power cable also suitable for multiple Type-C usb port devices such as dash cams, GPS navigators and radar detectors The Low Voltage Protection :OBDII Adapter Hardwire Charger Cable for dash cam is equipped with an intelligent program control chip.protect your car from running out thebattery, enable you have enough voltage to start the car for next driving Mode [O]: ACC mode, when your car ACC is off, the OBD power cable will alsopower off after 20 minutes. Mode [-]: Surveillance mode, when you car ACC is off, the 0BD Dash Cam power cable wilkeep working until detecting the car battery voltage is at 11.6V[12V car]/23.4V[24V car](low voltage),it will power off after 5 minutes Collision Detection: OBDII power adapter in the "0" ACC Mode,when the power adapter detected vehicle vibration,such as the Vehicle start again,moved,hit,the door opened or closed, the OBD II power adapter will immediately start automatically to power the dash cam and record what is happening. The OBD constant power cable will turn off the power supply again 20 minutes after detecting the last vibration.Built in High sensitivity vibration sensor for protecting vehicles Easy Installation:Plug and Play.OBD Power Cable for Dash Camera type-c port can be directly inserted into the OBD2 port of the car.Use a type c socket to charge the device.Obtaining power form OBD intenface only,no interference in other OBD datacommunication Note: It is NOT compatible with some vehicles,If you have 2020 Ram rebel,Ford F150 2021, Ford F150 Lariat 2011, Ford F350, Ford Edge 2011, Ford Explorer 2013, Ford Expedition 2013, Ford Ranger 2021 trucks/cars,this will not work for you Note:Try to avoid places where the vehicle is parked where there is a huge vibration (which may falsely trigger the obd 2 type c power cable).The USB Type-C connector of this obd ii power cable uses A5-B5 signal pins and may not be compatible with some dash cam brands use A8-B8 signal pins.Dash cam power adapter obd suitable for Type-C port electronic devices generally. (May not work with some phone charging protocol) OBD2 OBD Power Cable for Dash Camera,OBD to Type-C USB OBDII Adapter Hardwire Charger Cable 24 Hours Surveillance and Acc Collision Detection Mode,Low Voltage Protection,Plug and Play 12-36V to 5V/3A
Qutput: 5V/3A； Extension cable: 3.5meter(11.5 ft) length Wide Compatibility OBD Power Adapter：The OBD power cable for dash camera fits various vehicles like Jeep Cherokee, Chevy, Toyota, Truck, etc. with OBD or OBD2 ports. The OBD power cable also suitable for multiple Type-C usb port devices such as dash cams, GPS navigators and radar detectors The Low Voltage Protection :OBDII Adapter Hardwire Charger Cable for dash cam is equipped with an intelligent program control chip.protect your car from running out thebattery, enable you have enough voltage to start the car for next driving Mode [O]: ACC mode, when your car ACC is off, the OBD power cable will alsopower off after 20 minutes. Mode [-]: Surveillance mode, when you car ACC is off, the 0BD Dash Cam power cable wilkeep working until detecting the car battery voltage is at 11.6V[12V car]/23.4V[24V car](low voltage),it will power off after 5 minutes Collision Detection: OBDII power adapter in the "0" ACC Mode,when the power adapter detected vehicle vibration,such as the Vehicle start again,moved,hit,the door opened or closed, the OBD II power adapter will immediately start automatically to power the dash cam and record what is happening. The OBD constant power cable will turn off the power supply again 20 minutes after detecting the last vibration.Built in High sensitivity vibration sensor for protecting vehicles Easy Installation:Plug and Play.OBD Power Cable for Dash Camera type-c port can be directly inserted into the OBD2 port of the car.Use a type c socket to charge the device.Obtaining power form OBD intenface only,no interference in other OBD datacommunication Note: It is NOT compatible with some vehicles,If you have 2020 Ram rebel,Ford F150 2021, Ford F150 Lariat 2011, Ford F350, Ford Edge 2011, Ford Explorer 2013, Ford Expedition 2013, Ford Ranger 2021 trucks/cars,this will not work for you Note:Try to avoid places where the vehicle is parked where there is a huge vibration (which may falsely trigger the obd 2 type c power cable).The USB Type-C connector of this obd ii power cable uses A5-B5 signal pins and may not be compatible with some dash cam brands use A8-B8 signal pins.Dash cam power adapter obd suitable for Type-C port electronic devices generally. (May not work with some phone charging protocol) OBD2 OBD Power Cable for Dash Camera,OBD to Type-C USB OBDII Adapter Hardwire Charger Cable 24 Hours Surveillance and Acc Collision Detection Mode,Low Voltage Protection,Plug and Play 12-36V to 5V/3A