P.D Club DasMikro SANWA FHSS5U/FHSS5, FH5U/FH5 Tower Antenna NANO 4CH Compatible Receiver (Compatible models: M17, MT-5, MT-R) Number of channels: 4 Item dimensions: 0.69 inches P.D DasMikro Sanwa SANWA FHSS5U/FHSS5, FH5U/FH5 Tower Antenna NANO 4CH Compatible Receiver (Compatible Models: M17, MT-5, MT-R)
The DasMikro NANO 2.4GHz 4-Channel FHSS5 Receiver uses a tower antenna with excellent reach and response time. Lightweight design and small footprint, this receiver is ideal for micro scale electric RC cars.
Features:
1. Compatible with Sanwa 2.4GHz FHSS5U/FHSS5 Spectrum Diffusing System
2. Telemetry compatible
3. Indicator function (MT-5 only available)
4. Ultra Response Mode (SUR)
5. Extreme Response Mode (SXR)
6. Dual ID system (bind with 2 transmitters)
Nano Size:19mm*12mm*6.5mm 7.
8. Operating voltage: 3.5V ~ 8.4V
9. Weight: 1.2g
Binding Method:
⚠️The LED will not light up until the transmitter is fully binded.
(See video: https://youtu.be/o65OI8gf-F8)
1. Turn on the transmitter and call the BIND setting screen.
2. Choose the transmitter using FH5 or FH5U
3. Set it according to the servo or ESC that uses the response mode for each channel.
4. Press the BIND-ENTER of the transmitter to make sure it is working state.
5. Press and hold the BIND button on the receiver.
6. The blue LED on the receiver flashes quickly to indicate that BIND is complete, release the button and the LED will turn off.
7. Press the BIND-ENTER of the transmitter to finish the binding working state, and when the blue LED on the receiver is lit state,
Operation is possible, so BIND is complete.
Indicator function compatibility:
Indicator function to check the signal strength of the connected transmitter The indicator function can be used to find problems such as wrong setting of the receiver or to find the best receiver position for the transmitter. Indicator function allows you to check the signal strength without affecting the response.
Note:
The RPM sensor (SNW107A41061A) and temperature sensor are not compatible.
RPM and temperature telemetry are only available in Sanwa Super Vortex series.
Telemetry cannot be used in FH5U RF mode.
SXR response mode only supports transmitter M17.
Compatibility:
SANWA M17
SANWA MT-5
SANWA MT-R
Package Includes:
1 x SANWA NANO 4CH Compatible Receiver
4 x ZH1.5mm 3P Cable
The DasMikro NANO 2.4GHz 4-Channel FHSS5 Receiver uses a tower antenna with excellent reach and response time. Lightweight design and small footprint, this receiver is ideal for micro scale electric RC cars.
Features:
1. Compatible with Sanwa 2.4GHz FHSS5U/FHSS5 Spectrum Diffusing System
2. Telemetry compatible
3. Indicator function (MT-5 only available)
4. Ultra Response Mode (SUR)
5. Extreme Response Mode (SXR)
6. Dual ID system (bind with 2 transmitters)
Nano Size:19mm*12mm*6.5mm 7.
8. Operating voltage: 3.5V ~ 8.4V
9. Weight: 1.2g
Binding Method:
⚠️The LED will not light up until the transmitter is fully binded.
(See video: https://youtu.be/o65OI8gf-F8)
1. Turn on the transmitter and call the BIND setting screen.
2. Choose the transmitter using FH5 or FH5U
3. Set it according to the servo or ESC that uses the response mode for each channel.
4. Press the BIND-ENTER of the transmitter to make sure it is working state.
5. Press and hold the BIND button on the receiver.
6. The blue LED on the receiver flashes quickly to indicate that BIND is complete, release the button and the LED will turn off.
7. Press the BIND-ENTER of the transmitter to finish the binding working state, and when the blue LED on the receiver is lit state,
Operation is possible, so BIND is complete.
Indicator function compatibility:
Indicator function to check the signal strength of the connected transmitter The indicator function can be used to find problems such as wrong setting of the receiver or to find the best receiver position for the transmitter. Indicator function allows you to check the signal strength without affecting the response.
Note:
The RPM sensor (SNW107A41061A) and temperature sensor are not compatible.
RPM and temperature telemetry are only available in Sanwa Super Vortex series.
Telemetry cannot be used in FH5U RF mode.
SXR response mode only supports transmitter M17.
Compatibility:
SANWA M17
SANWA MT-5
SANWA MT-R
Package Includes:
1 x SANWA NANO 4CH Compatible Receiver
4 x ZH1.5mm 3P Cable