Specification:Material: Brass;Color: Brass; Total Size: 47.2x27mm/1.86x1.06inch(L*W);Flare tube OD size: 1/2 male flare X 3/4 male flare, suitable for connecting 1/2’’(12.7mm or 12mm)OD. copper pipes with 3/4’’(19.05mm or 19mm) OD. copper pipes;Packing List: 2Pcs X Brass flare Tube Fitting, 1Pcs x PTFE Tape Advantage: The tube fitting is made from thickened brass, strong and durable, anti-corrosion, and with high and low-temperature resistance, it can be used under a temperature range: -53℃ to 121℃ (-65 to 250 degrees Fahrenheit);Clear and standard threads ensure a good connection and avoid leakage, and come with a protective cap to avoid thread damage;This fitting contains an SAE 45-degree male flare connection on both ends, allowing you to make a welding-free connection. Application: This brass flare tube fitting is widely used in pipe connections for air conditioning, hydraulic and pneumatic systems, HVAC, automotive, humidifiers, grills, and fire pit. Also, the union fitting is suitable for fuel, gas systems, and refrigeration equipment. It can be used with copper, brass, aluminum, and other hydraulic tubes that can be flared. Instruction: Insert copper pipes with corresponding diameter into brass nuts(not included);Flare the copper pipes, then install and fix the pipes to the brass connector with a spanner. Note: Please confirm your tube or pipe size before ordering;The flare size of the connector refers to the OD size of the pipes to be connected, not the actual thread size;The PTFE Tape is offered as an additional accessory for your plumbing work, we don't advise using PTFE tape on flare tube fittings. This brass flare tube fitting is widely used in pipe connections for air conditioning, hydraulic and pneumatic systems, HVAC, automotive, humidifiers, grills, and fire pit. Also, the union fitting is suitable for fuel, gas systems, and refrigeration equipment. It can be used with copper, brass, aluminum, and other hydraulic tubes that can be flared.

Specification
1. Material: Brass
2. Color: Brass
3.Total Size: 47x27mm/1.85x1.06inch(L*W)
4.Flare tube OD size: 1/2 male flare X 3/4 male flare, suitable for connecting 1/2''(12.7mm or 12mm)OD. copper pipes with 3/4''(19.05mm or 19mm) OD.
5. Packing List: 2Pcs X Brass flare Tube Fitting, 1Pcs x PTFE Tape

Advantage
1. The tube fitting is made from thickened brass, strong and durable, anti-corrosion, and with high and low-temperature resistance, it can be used under a temperature range: -53℃ to 121℃ (-65 to 250 degrees Fahrenheit)
2. Clear and standard threads ensure a good connection and avoid leakage, and come with a protective cap to avoid thread damage.
3. The hex part allows you to tighten the fitting with a wrench easily.
4. This fitting contains an SAE 45-degree male flare connection on both ends, allowing you to make a welding-free connection.

Instruction
1. Insert copper pipes with corresponding diameter into brass nuts(not included).
2. Flare the copper pipes, then install and fix the pipes to the brass connector with a spanner.

Note:
Please confirm your tube or pipe size before ordering.
The flare size of the connector refers to the OD size of the pipes to be connected, not the actual thread size.
The PTFE Tape is offered as an additional accessory for your plumbing work, we don't advise using PTFE tape on flare tube fittings.