Lamp rotation knob base E26 phenolic resin socket, the bottom is 2-piece, with high hardness, good wear resistance, high temperature resistance and so on. E26 lamp holder can only be rotated clockwise in one direction. Switch 1/2 turn, turn 1/2 turn in the same direction, switch off. Light sockets with switches can accurately replace bulb sockets, can be used to replace old or damaged sockets, repair floor lamps, desk lamps, clamp lamps, etc. It is also an ideal outlet for your diy projects. The button light is a standard switch knob socket with screw terminals, the socket part of the medium base socket is flat on the side, not only can be installed with flat side holes, but also suitable for completely round holes. The installation of the lamp holder and lamp components is simple, the hot/positive wire (black cover) is connected to the brass screw, and the neutral/negative wire (white wire) is connected to the silver screw. Product name:Lamp replacement socket
Product material: phenolic resin
Product color: Black
Rated power: 660W 250V, wire diameter: MIN, 600V 18AWG Note: The power should not exceed 660W.
Product dimensions: Total length, 85mmx31mm/3.34 "x1.22" (L x W), sleeve housing height: 43mm/1.69"
Package includes: 1 bulb socket
Warm reminder:
1. The above parameters are manually measured weight and size may have errors Specific information please refer to the actual.
2. Due to differences between different monitors, the picture may not reflect the actual color of the item. Thank you very much!