High service flow rates result in lower equipment costs and a savings in space. Deep bed filtration results in superior water quality and reduces the load on downstream equipment. Filter-Ag Plus is a unique natural ore called clinoptilolite that has many advantages over common granular filter sands and multimedia used for suspended solids reduction. Clears up murky and cloudy water caused by suspended particles in the water. Removes particles down to 5 microns. Reduces the risk of clogging valves, aerators, filter screens, and filtration systems. High sediment removal capacity results in longer filter runs, with a substantial savings in backwash water and time out of service. Clack Filter-Ag Plus structure typically creates less pressure loss through the filter and allows deeper sediment penetration into the bed for higher sediment loading and longer filter runs. Sediment in your drinking water can cause a range of negative effects like unpleasant taste and odor, discoloration, and potential clogging of plumbing fixtures and appliances. This heavy-duty whole house system provides a comprehensive solution that effectively removes sediment, turbidity, and other impurities from your water supply. It is designed to deliver sediment-free water while protecting your plumbing and appliances from sediment buildup. Invest in a whole house system for sediment & turbidity removal today and experience the benefits of clean water for your entire household.

Whole House Filtration System kit

This system comes with the following:

• 1 Timer Backwash valve
• Adapter
• Transformers as needed
• Filter-Ag plus Media - preloaded in tank
• TANK 10" x 54" Mineral Tank - could be any color.

PHYSICAL PROPERTIES

• Color: Light tan to near white
• Bulk Density: 50 lbs./cu. ft.
• Specific Gravity: 2.2 g/cc
• Mesh Size: 14 x 30
• Effective Size: 0.55 mm
• Uniformity Coefficient: 1.8
• Hardness: 4-5 (Mohs scale)

CONDITIONS FOR OPERATION

• Water pH range: wide range
• Maximum water temperature: 140°F/60°C
• Bed depth: 24-36 in.
• Freeboard: 50% of bed depth (min.)
• Service flow rate: 12-20 gpm/sq.ft.
• Backwash flow rate: 15-20 gpm/sq.ft.
• Backwash bed expansion: 30-40% of bed depth
• Local conditions may require lower flow rates
• A gravel support bed is required
• Allow bed to saturate before initial backwash