🚓【Solve Common Failures Of Fuel Injector】：Easily solve common faults such as stuck, blocked, leaked, or insufficient combustion of the fuel injector. 🚓【Standard Fuel Injector & High-Pressure Fuel Injector】The fuel injector cleaning kit is not only suitable for standard injectors in gasoline engines, but also for high pressure injectors in diesel engines. Configurable 12V and high voltage drive options. The high voltage is suitable for 70V, 120V and other injectors. 🚓【Wide Operating Frequency & Time Range】: The operating frequency range of the car fuel injector cleaning tester can reach 600~6000 rpm, the working time setting range can reach 0~99 minutes. 🚓【Fuel Injector Cleaner Tester With LCD Display】: Working frequency and time are digitized for more precise adjustment. 🚓【Perfect Match】: Car Fuel Injector Signal Generator high-volt injector drive mode can be used with the fuel injector cleaner & tester. Also, it can be used to enhance all fuel injector pulse signals. 🚓【Two Injectors Can Be Tested At The Same Time & Two Types Of Power Supply】: CT60 Fuel Injector Signal Generator is equipped with two different size adapters, which can be connected to two nozzles working at the same time (old and new injectors can be contrasted) to compare the sprayability state and spray angle of fuel injection.Injector cleaner is equipped with a power adapter and a alligator clip power cable,you can use the 12V battery on the vehicle as a power source or connect it to an AC 110V/220V power supply. 🚓【Adjustable Fuel Injector Tester】: CT60 Fuel Injector Signal Generator is possible to set multiple pulse outputs and adjust speed, pulse width,operating time and other parameters as required and clearly displayed on the LCD display for more accurate adjustment.The working frequency range of the injector tester can reach 600~4000 rpm, and the working time setting range can reach 0~99 minutes.During the cleaning process,pulse cleaning can be achieved by adjusting the RPM and width to optimize the cleaning effect. 🚓【Widely Applicable Injector Tester】: CT60 Fuel Injector Signal Generator can be used with any fuel pressure tester, it can clean both standard and high pressure injectors and has a high pressure injector drive mode that can be used with other fuel system cleaners.It can also be used to enhance the pulse signal of all injectors and complete the cleaning and testing of other injector cleaning equipment. 🚓【Three Years Warranty】: For any quality problems. If CT60 Car Fuel Injector Signal Generator has any defect, we will provide new replacement or solutions for our customers until satisfaction without delay, and provides lifetime technical support. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
Features：
1、Easily solve common faults such as stuck, blocked, leaked, or insufficient combustion of the fuel injector.
2、Three-year warranty and lifetime maintenance.
3、The pulse width and RPM can be continuously adjusted and different programs can be applied to drive the injectors.
4、During the cleaning process, pulse cleaning can be achieved by adjusting the RPM and width to optimize the cleaning effect.
5、Can be used with any fuel pressure tester
6、This device can also be used with ultrasonic cleaners and older fuel injector testers. The drive mode of the GDI engine injector added to this machine can be used as an upgrade kit for the old version of the machine (machine without GDI drive).

Instructions：
1、Turn off the vehicle's engine and remove the fuel injectors from the engine.
2、Connect the pulse output to the power input port on the fuel injector.
3、Connect the positive and negative electrodes clamps to the 12V battery.
4、Press RPM "+" "-" key to select the required analog speed. Press "Start" button, then the device starts working.
5、Select the required injector.
6、Put the device into the connection equipment, and then press the carburetor cleaner.
7、Press RPM "+" and "-" keys, the tester will output pulse to the injector, and then the pulse signal indicator will light up. The device will start working.
8、Use self-pressure detergent, you need to select the corresponding connector and connect it well. Press the start button to start spraying, and observe the sprayability status and spray angle with your naked eye.

Precautions:
1、Make sure the car engine must be turned off before using this device.
2、Do NOT smoke or light near the car.
3、Do not spill the car's fuel on hot engine parts.
4、Perform this device in a well-ventilated place only .
5、Do NOT approach any rotating parts of the car, and do NOT touch any heating parts of the car.