NOTE: There are two plugs, 24 pin and 8 pin respectively; 24-pin wiring connector for power and speaker connections, 8-pin plug for RCA to factory subwoofer; Designed for base amplified sound systems (excludes Sony/THX sound systems) Compatible with Ford Mustang 2004-2009, Explorer 2006-2009 (without NAV), Explorer Sport Trac 2006-2010, Taurus (including X) 2008-2009, Crown Victoria 1998-2002, 2003 Crown Victoria LX, Fusion 2006-2009, Escape 2004-2007 (with sub, 7-speaker system), Escape Hybrid 2005-2007, Escape 2011-2012, Expedition 2004-2008 (without NAV) Replacement for Ford F-150 2004-2014, F-250 / 350 / 450 / 550 2011-2012 (without NAV), F-250 / 350 / 450 / 550 2008-2010, 2013-2016 F-250/350/450/550 XL model no factory CD radio, Focus 2005-2007, 2010 Focus with sync, Freestyle 2005-2007 Fitment list: For Lincoln: MKX (w/ OEM NAV) 2007-2010, Navigator (w/OEM NAV) 2007-2014; For Mercury Mariner 2008-2011, Mountaineer 2006-2010, Sable 2008-2009; For Hyundai Sonata 2006-2008 Feature: Allow to install an aftermarket radio using the existing factory wiring and connectors; Wire harness has been coded that easy to know which one for supply signal and power to the factory amplifiers Easy to install: Take the harness from new stereo and matched up the wire colors; Directly plug without cut or splice anything in the car Note: Before purchasing the wiring harness, please check if your aftermarket radio is already equipped with radio harness. If it is, do not make duplicate purchases

Specification:
Integration Harness To Plugs To Radio Harness
2 RCA Plugs Plug Into Aftermarket Radio's Pre-Amp Outputs
One 24-Pin Power Plug And One 8-Pin Subwoofer Plug
Allows For The Install Of An Aftermarket Radio Using The Existing Factory Harness
No Cutting Of Factory Wiring Needed

Feature:

**Harness is used when installing an aftermarket stereo.

**Standard color coded wires provide a consistent and simplified installation.

** The antenna adapter is used to adapt the factory antenna end to the standard Motorola male end needed to install your new aftermarket radio. This adapter may not work if you have installed an aftermarket antenna, as most of those do not require adaptation.

**CD player replace your factory or broken stereo harness and antenna wire. Do not directly plug and play, Solder connections and heat shrink tubing for best results.

**After connecting it, your install is simple as the wires will color-match and easily connect to the after-market stereo.

Note:
Vehicle Compatibility Chart May Vary Depending On Vehicle Options, Production Dates, And Install Application. Please Inquire Before Purchase