【RP2040-ETH Module】 Based On RP2040, Onboard Ethernet Port,Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 264KB of SRAM, and 4MB of onboard Flash memory. Onboard CH9120 with integrated TCP/IP protocol stack. 14 × multi-function GPIO pins, compatible with some Pico HATs. Castellated module allows soldering direct to carrier boards. Drag-and-drop programming using mass storage over USB. 8 × Programmable I/O (PIO) state machines for custom peripheral support. Controllable via network. Support multiple communication modes: Supports TCP Server / TCP Client / UDP Server / UDP Support C/C++, MicroPython, Arduino: Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started Introduction
RP2040-ETH is a mini RP2040-ETH development board, which integrates TCP/IP protocol stack for network communication. 14 × multi-function GPIO pins and the castellated holes on its PCB edges allow easy and quick integration into projects.

Features
Adopts RP2040 micro-controller chip designed by the official Raspberry Pi.
Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz.
264KB of SRAM, and 4MB of onboard Flash memory.
Onboard CH9120 with integrated TCP/IP protocol stack.
With the host software and serial commands, you can set the network parameters such as chip operating mode, port, and IP.
The castellated module allows soldering directly to carrier boards.
Drag-and-drop programming using mass storage over USB.
14 × multi-function GPIO pins, compatible with some Pico HATs.
More hardware peripherals:
1x SPI (SPI0);2x I2C;2x UART;13x Controllable PWM channels
Temperature sensor.
8 × Programmable I/O (PIO) state machines for custom peripheral support.
Support multiple communication modes: Supports TCP Server / TCP Client / UDP Server / UDP
Support C/C++, MicroPython, Arduino: Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started

Online Tutorial: n9.cl/84nru

Package Content
RP2040-ETH x1