This is a custom-designed upper radiator support/shroud intended for use in 3rd gen Camaro and Firebirds (1982-1992) with oversized, aftermarket, 4-row radiators or extra-thick 3-row radiators. This replaces the original plastic top shroud, and is intended for use with aftermarket aluminum radiators or LS swaps.
If your 3rd gen's top radiator holder is missing, or you're using zip ties or long bolts to hold your aftermarket radiator in place, this is the part you've been looking for!
Manufactured in North Carolina, USA out of heavy duty 14 gauge 5052 aluminum; it is sturdy enough that it will likely outlast your Camaro. Installation is simple - just remove and reinstall with the 4 bolts along the front edge of your current radiator support. For the perfect tight fit, you'll want to trim and install rubber isolators to fit your specific radiator setup. Rubber isolators are not included, because we only sell parts made in the USA and have not found any isolators that aren't made in China.
Please note that no upper hose bracket is included, as every build is different. If your upper hose needs more support, you can drill this bracket and add a hose clamp to hold the hose where you need it.
Available Finishes
- "Shiny" polished-look finish - this is a smooth, raw aluminum finish (also known as "mill finish"). Looks great under the hood, but can attract scratches due to its natural finish. My lawyer said to tell you "please note, these are made of raw aluminum which naturally attracts scratches and may have small imperfections due to the mill or manufacturing process", but I do my best to avoid scratches.
- Semi-gloss black powder coated. Professionally powder coated Cardinal T002-BK08 semi-gloss black, this looks great under the hood, especially on black or white cars.
Please note, these are raw aluminum which naturally attracts scratches and may have small imperfections due to the mill or manufacturing process.
Sizing
4-row or thick 3-row radiators, fits radiators up to 3-5/8" thick. Please measure your radiator before ordering, as most setups require our standard 3-row part which fits radiators up to 2-7/8" thick - this 4-row part is only for special, oversized setups (including very thick 3-row radiators). Also confirmed by customers to fit the Cold Case 2-row LMP590 radiator.
Vehicle Fitment
Fits all 3rd gen 1982-1992 F-Body cars that have been retrofitted with an oversized aftermarket 4-row radiators or very thick 3-row radiators. Also confirmed to fit the Cold Case 2-row LMP590 radiator.
- 1982 Chevrolet Camaro (including 1982 Z28)
- 1982 Pontiac Firebird (including 1982 Trans Am)
- 1983 Chevrolet Camaro (including 1983 Z28)
- 1983 Pontiac Firebird (including 1983 Trans Am)
- 1984 Chevrolet Camaro (including 1984 Z28)
- 1984 Pontiac Firebird (including 1984 Trans Am)
- 1985 Chevrolet Camaro (including 1985 Z28 and 1985 IROC-Z)
- 1985 Pontiac Firebird (including 1985 Trans Am)
- 1986 Chevrolet Camaro (including 1986 Z28 and 1986 IROC-Z)
- 1986 Pontiac Firebird (including 1986 Trans Am)
- 1987 Chevrolet Camaro (including 1987 Z28 and 1987 IROC-Z)
- 1987 Pontiac Firebird (including 1987 Trans Am / Trans Am GTA and 1987 Firebird Formula)
- 1988 Chevrolet Camaro (including 1988 IROC-Z)
- 1988 Pontiac Firebird (including 1988 Trans Am / Trans Am GTA and 1988 Firebird Formula)
- 1989 Chevrolet Camaro (including 1989 IROC-Z)
- 1989 Pontiac Firebird (including 1989 Trans Am / Trans Am GTA and 1989 Firebird Formula)
- 1990 Chevrolet Camaro (including 1990 IROC-Z)
- 1990 Pontiac Firebird (including 1990 Trans Am / Trans Am GTA and 1990 Firebird Formula)
- 1991 Chevrolet Camaro (including 1991 Z28)
- 1991 Pontiac Firebird (including 1991 Trans Am / Trans Am GTA, 1991 Firebird Formula, and 1991 Formula Firehawk)
- 1992 Chevrolet Camaro (including 1992 Z28)
- 1992 Pontiac Firebird (including 1992 Trans Am)