Part # K243111000 must match part # of your current receiver (found on sticker as the back as shown in photo) (These are found in "new platform" fans sold from 2013 on) Operates 3 fan speeds, instant fan "Off," and fully dimmable light operation. Rated for fans at 1.0 amps and fan lighting at 300 watts. Receiver fits in fan canopy. Pairing Instructions: Turn off the breaker that powers the fan. Leave power off for 1 minute and then turn back on.Within 3 minutes, press the pair button on the remote (inside the battery compartment). If pairing was successful, a single beep will sound. Replace the battery door.If it does not beep, turn off power to your fan, wait 1 minute then try again. If using the transmitter with multiple fans, repeat this process for each fan.If fan is a pull-chain model, please make sure that pull-chain control is set to High speed for remote to work correctly. Note: The remote must be paired to this new receiver before the fan will operate. To be used with the hunter 99107 simple connect Package Included: Receiver only (wireless remote/transmitter not included) Replacement Ceiling Fan Remote Control Receiver for Hunter Ceiling Fan K243111000 99106 99732 1.9, Blue Part No/Number: K243111000 Rating/Voltaje: 120V ~，60HZ Freq/Frecuencia: 434MHz Fan/Ventilador: 1.0A Light/Luz: 300W