3D miniature candy vending machine or crystal ball shaker molds 9-count. 4 different game machine base silicone molds (mini size_height 1inch) and 5 clear glass globes (diameter 1inch). Classic twirling gum ball machine UV resin casting molds. Make waterfall resin shaker pendant, kawaii keychain charms, snow globe, realistic dollhouse gumball bank, old fashion game toy ornament, christmas crystal ball, cabochon. Large space glass orb with small hole at top for injecting drift sand oil. Make water fall or quicksand effect by adding glitter, confetti, embellishments, floating charms, miniature, rhinestones, baby oil / water / water + glue / liquid (if you want to make waterfall effect) or anything colorful, kawaii, sparkle. Mainly use with modelling clay (air clay, paper clay, resin clay, polyclay, polymer clay, salt clay, metal clay, liquid clay etc.), resin(epoxy resin, rethane resin, uv resin, polyester resin), concrete, cement, plaster, hot glue, soap, candle, wax, mix media and more Transparent soft rubber mold, you can check the buttom when process project. Easy to demold, gloss finish. Food Grade. Food and Non Food material should use separately. Wash and boil before use, especially for food. Easy to use mold very flexible and easy to clean, can be used in oven, dishwasher, refrigerator etc. Can be used within the temperature between -40~220 centigrade / -40~428 fahrenheit

Dimension approximate:

Mold size:

0.9x0.75inch

1x0.6inch

1x0.8inch

1x0.9inch

Glass bubble_1inch (2.5cm) diameter

Mold color: clear

Finish: gloss (may require polish/glaze if need a shiniest/most glossy look)

Suffer temperature: -40 to 230 centigrade/ -40 to 446 fahrenheit

Can be used with dishwasher/oven/refrigerator

Food grade, no BPA/PVC/phthalate

Wash and boil before use, especially for food

More Tips to use with Epoxy Resin:
1) Poured in silicone molds in layers, allowing air bubbles completely escape;
2) To expedite the process of escaping of bubbles and time of solidification of resin, the mold can be a bit warmed up, for example, heat the oven to 80°C, turn off, ventilate it a little and put mold, filled with resin in the oven.
3) Follow resin instruction for the time need to cure, measure and mix resin properly. It does not mean it has been cured if it is hard.
4) Do not use water-base ink for resin casting.
5) After baking clay / resin in complex or deep molds release the finished product under running water with soap.
6) Put in refrigerator a while/ soak in hot water a while/ release with baby oil if it is hard to release.