【Package Inclueds】2*42002-0024S Stack Flue Sensor—Located on the exhaust elbow of the pool heater. Operating temperature ranges from -20°C to 105°C 【Wide Compatibility】42002-0024S Stack Flue Sensor Replacement for Pentair MasterTemp pool and spa heater electrical systems.Fits for Pentair Sta-Rite Max-E-Therm pool and spa heater electrical systems model SR200, SR333, SR400 【Excellent Performance】42002-0024S can effectively prevent the flue gas output from exceeding 500°F. When this fails, the system will display an error code E05 or E06 to indicate that the chimney flue sensor must be replaced 【High Quality】Our products are made of stainless steel, which is not easy to rust, and have been rigorously tested by the manufacturer, are not easy to damage, and have a longer service life. NOTE—Please turn off the power before replacing and wear work gloves to protect your hands！ 【After-sales Service】If you are not satisfied with the product for any reason, please feel free to contact us or ask a question through Amazon, it would be our pleasure to serve you!
42002-0024S (Pack of 2) Stack Flue Sensor
The part works with pool and spa heater electrical systems. The part also works with pool and spa heater electrical systems model SR200, SR333, SR400.
The package includes 2pcs of 42002-0024S Stack Flue Sensor.
This part works with the following models:
Pool and spa heater electrical systems model: SR200, SR333, SR400.
The part possibly fixes the following problems:
A stack flue sensor, located on the exhaust elbow of a pool heater, prevents the flue gas output from exceeding 500°F. When this fails, your system will show error codes E-02, E-05 or E-06 to indicate that the stack flue sensor must be replaced.
Replacement steps:
1.Turn off the filter pump and all electrical power to the pool heater.
2.Allow the heater to cool for at least 30 minutes before proceeding to the next step.
3.Unbolt and remove both the upper left and upper right jackets from the heater.
4.Disconnect the wires from the old indoor stack flue sensor.
5.Remove the old sensor by turning it counter-clockwise with a ½” open end wrench.
6.Install the new sensor, sealing it with a bead of RTV sealant before threading it into the exhaust elbow.
Please Note:
Make sure the power is shut off before replacement. Wear work gloves to protect your hands.
The part is compatible spare part (not original), the brand names mentioned and any related models designation above are only for purposes of demonstrating compatibility.
42002-0024S (Pack of 2) Stack Flue Sensor
The part works with pool and spa heater electrical systems. The part also works with pool and spa heater electrical systems model SR200, SR333, SR400.
The package includes 2pcs of 42002-0024S Stack Flue Sensor.
This part works with the following models:
Pool and spa heater electrical systems model: SR200, SR333, SR400.
The part possibly fixes the following problems:
A stack flue sensor, located on the exhaust elbow of a pool heater, prevents the flue gas output from exceeding 500°F. When this fails, your system will show error codes E-02, E-05 or E-06 to indicate that the stack flue sensor must be replaced.
Replacement steps:
1.Turn off the filter pump and all electrical power to the pool heater.
2.Allow the heater to cool for at least 30 minutes before proceeding to the next step.
3.Unbolt and remove both the upper left and upper right jackets from the heater.
4.Disconnect the wires from the old indoor stack flue sensor.
5.Remove the old sensor by turning it counter-clockwise with a ½” open end wrench.
6.Install the new sensor, sealing it with a bead of RTV sealant before threading it into the exhaust elbow.
Please Note:
Make sure the power is shut off before replacement. Wear work gloves to protect your hands.
The part is compatible spare part (not original), the brand names mentioned and any related models designation above are only for purposes of demonstrating compatibility.