**Verify your jack is correct before ordering** Check pictures to find your jack saddle style. Bolt on - Fine thread is most common, make sure to measure the diameter. Bolt on - Coarse Thread is found on Duralast and Torin jacks. - Cross pin style is used on most 1.5 ton jacks. - Drop in style is common for older jacks made more than 10 years ago. Converts your floor jack into a universal 1 1/2" pin. The saddle alone gives a 2" extension, it comes with 6" and 11" extensions that you can stack for a total of 16" extension. Comes with 3" round saddle and polyurethane jack pad glued on. Made in USA - Extension tubes are swaged from 1 1/2" DOM tube. Saddle is 1/4" A572 steel and everything has a nice Zinc plated finish. Recommended limits – 3 ton or full jack rating w/ 6” extension –75% of jack rating w/ 11” extension– 50% of jack rating w/both stacked at 16” ext. Check out our store for other products and more options. We have different saddle and extension length choices. Along with a Big Flat Plate and 4 Point Jack Adapter, which also work with this. We specifically designed these to work with Prothane polyurethane jack pads, that's why we include them as well. The floor jack extension converts your floor jack into a universal 1 1/2" pin. The saddle alone gives a 2 to 3" extension, it comes with 6" and 11" extensions that you can stack for a total of 16" extension. There are multiple pin styles to work with different floor jacks. The extension tubes are swaged from 1.5 x .120 DOM tube and have a pressed in stop collar.

Recommended limits – full jack rating w/ 6” ext. –75% of jack rating w/ 11” ext. – 50% of jack rating w/both stacked at 16” ext.

All styles come with:
-1 1/2" diameter conversion pin - 1018 steel
-6" & 11" DOM extension tube
-3" Round Saddle - laser cut, formed & welded - 1/4" A572
-Prothane poly jack pad - 3 1/4" O.D.

For up to 3 ton floor jacks
Jack Saddle Styles -
Bolt on - Fine Thread -Most common. Includes large washer for jacks with a lip sticking up when factory saddle is removed.
Bolt on - Coarse Thread -Used on Duralast, Torin and potentially other brand jacks
Cross Pin -Fits most 1½ ton jacks that use a cross pin to retain the saddle.
Drop in pin -Fits older style jacks with 1.17" or 1 3/16" pin

For up to 3 ton floor jacks - The longer extensions add leverage to your jack base, which will bend or break if used improperly. The fail point in our destructive testing is the floor jack base, where our 1 1/2" pin attaches. This bends your jack, then our extension pin and tube with around 500-1000 lbs of side load, depending on the jack and extension. Weld our 1 1/2" pin to your jack for increased strength, a couple stitch welds is all it takes.