0/1-10V LED dimming knob switch controller. The minimum is adjusted to 0.6V. The connected power supply 0/1-10V interface must have a voltage of 10V for dimming; the maximum load connected to the driver is 10V/40mA; the minimum output connection cable size is 1007#20AWG, and the maximum output cable length is 5OM. Switch size: 34*22*36 mm Mounting hole diameter: 7mm. Designed for 1-10V regulation and compatible with all 0/1-10V interface dimmable electronic LED drivers, ballasts, transformers and power dimmers. Note: Place the drive away from direct heat sources and well-ventilated places. If the drive is built-in, adequate ventilation must be ensured. Product: 0/1-10V LED dimming knob switch controller
Switch size: 34*22*36 mm
Mounting hole diameter: 7mm

The minimum output connection cable size is 1007#20AWG, and the maximum output cable length is 5OM;
The maximum load connected to the driver is 10V/40mA;
The connected power supply 0/1-10V interface must have a voltage of 10V for dimming.

When connecting electronis LED drivers, ballasts, transformers and power dimmers, please connect "+" and "-" carefully.