SW3L Outdoor LoRaWAN Water Flow SensorThe Dragino SW3L is a LoRaWAN Flow Sensor It detects water flow volume and uplinks to the IoT server via the LoRaWAN network Users can use this to monitor the water usage for buildings Sensors, Water SW3L Outdoor LoRaWAN Water Flow Sensor
The Dragino SW3L is a LoRaWAN Flow Sensor. It detects water flow volume and uplinks to the IoT server via the LoRaWAN network. Users can use this to monitor the water usage for buildings.
SW3L is powered by an 8500mAh Li-SOCI2 battery, It is designed for long-term use for up to 10 years. (Actually, the Battery life depends on the use environment and update period.)
The SW3L will send water flow volume every 20 minutes. It can also detect the water flow status and send an Alarm to avoid waste for water usage such as broken toilet cases.
SW3L is designed for both indoor and outdoor use. It has a weatherproof enclosure and industrial-level battery to work in low to high temperatures.
Each SW3L is pre-loaded with unique keys for LoRaWAN registration, register these keys to the LoRaWAN server, and it will auto-connect after powering on.LDS03A has the open alarm feature, user can set this feature so the device will send an alarm if the door has been open for a certain time.
LDS03A is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
Each LDS03A Outdoor LoRaWAN door sensor is pre-load with a set of unique keys for LoRaWAN registration, register these keys to
LoRaWAN server and it will auto-connect after power on.
LoRaWAN v1.0.3 Class A protocol
Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865/RU864
Upload water flow volume
Monitor water waste
8500mAh industrial battery(none-rechargeable)
AT Commands to change parameters
Uplink on periodically and open/close event
Datalog feature
Remote configure parameters via LoRa Downlink
Firmware upgradable via program port
Wall Mountabl
The Dragino SW3L is a LoRaWAN Flow Sensor. It detects water flow volume and uplinks to the IoT server via the LoRaWAN network. Users can use this to monitor the water usage for buildings.
SW3L is powered by an 8500mAh Li-SOCI2 battery, It is designed for long-term use for up to 10 years. (Actually, the Battery life depends on the use environment and update period.)
The SW3L will send water flow volume every 20 minutes. It can also detect the water flow status and send an Alarm to avoid waste for water usage such as broken toilet cases.
SW3L is designed for both indoor and outdoor use. It has a weatherproof enclosure and industrial-level battery to work in low to high temperatures.
Each SW3L is pre-loaded with unique keys for LoRaWAN registration, register these keys to the LoRaWAN server, and it will auto-connect after powering on.LDS03A has the open alarm feature, user can set this feature so the device will send an alarm if the door has been open for a certain time.
LDS03A is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
Each LDS03A Outdoor LoRaWAN door sensor is pre-load with a set of unique keys for LoRaWAN registration, register these keys to
LoRaWAN server and it will auto-connect after power on.
LoRaWAN v1.0.3 Class A protocol
Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865/RU864
Upload water flow volume
Monitor water waste
8500mAh industrial battery(none-rechargeable)
AT Commands to change parameters
Uplink on periodically and open/close event
Datalog feature
Remote configure parameters via LoRa Downlink
Firmware upgradable via program port
Wall Mountabl