【Applicable Models】- The forward and reverse switch for 1994-up EZGO TXT, Medalist and UTVs with 36-volt series drive systems. ( Not for DCS or PDS Golf Carts & Not for Golf Carts with Run Or Tow Switches.) 【Replacement OEM Part Number】- OEM #70578-G01, Our parts meet or exceed OEM quality. 【Premium Material】- The forward and reverse switch assembly is made of anti-oxidation, fire-resistant and anti-insulation materials which are rust and electric shock resistant, reducing the need for frequent replacement and ensuring optimal performance of the golf cart. 【Easy Installation】- If the shift linkage is not oriented correctly, please unscrew the nut at the back and rotate the shift linkage 90 degrees until it is parallel in three places, then it will work properly. If you cannot reverse, please tighten the corresponding screws. (Make sure the forward reverse switch is disconnected from the battery, we strongly recommend using cable #4 and the HD solenoid.) 【Best Choice】- The forward reverse switch for ezgo is a must-have accessory if your golf cart has a high amperage controller installed or motor upgraded. Product Features
1. Make sure the reverse switch is disconnected from the battery before installing, we highly recommend using a #4 cable and HD solenoid.
2. Antioxidant layer prevents rust and corrosion. Reinforced plastic housing for durability. High quality materials for maximum strength.
3.If your golf cart has a high amp controller or upgraded electric motor, the forward and reverse switch assembly is a must-have accessory.
4.If your golf cart can only go forward or reverse, after completing the switch installation. Please adjust and tighten the nuts. Do not over tighten or it may snag the handle.
Easy to Install
If the direction of shift linkage is wrong, please unscrew the nut on the back and rotate the shift linkage by 90 degrees until the three places are parallel, then it can work normally. Tighten the screws accordingly if it doesn’t go in reverse. Make sure the Reverse Switch for EZGO to disconnect a battery before installing this selector and we strongly recommend 4 gauge cables and HD solenoid.
fit ezgo forward reverse switch 36 volt
fit ezgo txt forward reverse switch
fit ezgo txt parts
fit ezgo txt golf cart accessories
1. Make sure the reverse switch is disconnected from the battery before installing, we highly recommend using a #4 cable and HD solenoid.
2. Antioxidant layer prevents rust and corrosion. Reinforced plastic housing for durability. High quality materials for maximum strength.
3.If your golf cart has a high amp controller or upgraded electric motor, the forward and reverse switch assembly is a must-have accessory.
4.If your golf cart can only go forward or reverse, after completing the switch installation. Please adjust and tighten the nuts. Do not over tighten or it may snag the handle.
Easy to Install
If the direction of shift linkage is wrong, please unscrew the nut on the back and rotate the shift linkage by 90 degrees until the three places are parallel, then it can work normally. Tighten the screws accordingly if it doesn’t go in reverse. Make sure the Reverse Switch for EZGO to disconnect a battery before installing this selector and we strongly recommend 4 gauge cables and HD solenoid.
fit ezgo forward reverse switch 36 volt
fit ezgo txt forward reverse switch
fit ezgo txt parts
fit ezgo txt golf cart accessories