HIGH-SOLIDS TOPCOAT: Our 2-component polyaspartic coating system has a high solid content which creates a beautiful gloss finish that will protect against UV, chemicals, Abrasion and scratches. Use it for protecting home and industrial flooring projects. VERSATILE: Our polyaspartic coating is great for projects like garage floor coating or countertop coating as it is abrasion and chemical-resistant. It will create a glossy, crystal-clear coat over colored coatings or SIMIRON Decorative Chip Flakes. VARIETY OF CURE SPEEDS: This polyaspartic floor coating has a variety of pot life for easy workability with fast, medium, slow, and XTRA slow cure speed options. Polyaspartic HS XTRA Slow Cure has extended working time for extremely hot and/or humid environments. Polyaspartic HS Slow Cure has longer working time. It is an excellent choice for applicators with less experience or installations that may require more work time. Polyaspartic HS Medium Cure is your standard curing topcoat with a normal working time. Polyaspartic HS Fast Cure is an epoxy with reduced work and cure times for experienced installers with large crews and jobs that need to be turned quickly. EASY TO USE: 1 Parts Base to 1 Part Activator by volume. Mix with low speed drill and Jiffy blade for three minutes until uniform. SIMIRON: We proudly create a variety of polymer floor coatings, including epoxy resin and polyurethane. All our products are manufactured on-site and undergo extensive development and quality testing. APPLICATION STEPS: 1. Apply at a spread rate of 100 – 160 sq. ft. per gal. to yield 10 – 16 wet film thickness using a squeegee and back-roll with a non-shedding 3/8” nap roller. 2. In hot or humid conditions, apply via 18” roller in a dip and roll method from a roller pan as increased heat and humidity will decrease the working time of the material. 3. This material will cure faster with exposure to moisture in the air. 4. To avoid visible differences in texture or mix-to-mix “tie-ins” do not exceed 5 – 10 minutes from one mix to another. 5. Use joints as natural breaks to divide sections of the floor. SIMIRON POLYASPARTIC HS is a two-component, high performance, aliphatic polyaspartic floor coating designed for application over full broadcast systems. It is available in SLOW, MEDIUM, and FAST speeds to cover a wide range of application temperature and cure time needs. It provides superior protection through its excellent adhesion, durability, and resistance to stains, chemicals, and damaging UV rays. POLYASPARTIC HS can be applied up to 16 mils thick in a single pass to seal floors broadcast with Decorative Chip, decorative quartz and silica sand, which greatly reduces return to service time over other coating types. It dries to a hard, non-yellowing finish with superior chemical resistance that can be used in both indoor and outdoor applications