【Easy to Use】notice:We have setted transmitter and receiver working together in Latching Mode,If you want to change the working mode, you need to clear the code first,Clearing method :Press the Learning button 9 times, Until the receiver Led indicator flash for 5 times and then goes out, it mean successfully.Working voltage: DC 3.6V~18V; Maximum load: 1.5A; 【SIGNAL 】The RF remote control adopts RF technology, stable signal. Signal of the wireless RF switch can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance, Max range is up to 164ft/50m with no obstacle. 【Advantage】: flexible operation, Small size, high sensitivity. Resist Interference: It adopts non-directional wireless encoding technology, allowing independent control without mutual interference; 【EASY and SAFE】The wireless remote control switch is easy to use and safety. the Working Voltage: DC3.6V-DC12V; Max Load: 1.5A (have better Load less than 1A);wide range of applications from simple domestic remote control to autonomous control, such as battery power switch, remote controller, wireless controller, relay, buzzer, trumpet,electric lock,car door, circuit board etc. 【Wireless Control】:The receiver module shipped out with the black protection case. Tips:If you encounter any problems in use, please feel free to contact us any time, we will be happy to serve you, thank you very much! Attention Please:
The product shipped out with default mode:Latching Mode! Just install it right.
About Working mode:
Momentary:Push the remote button, the relay connects, release the remote button, the relay dis-connects.
Toggle:Push once the remote button, the relay connects, push twice the remote button , the relay dis-connects.
Latching: Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Time delay mode:Push the remote control button, the relay connects, from when release the remote button, after 5s or 10s or 15s or 20s, the relay disconnect automatically.
Steps:
1.Clear Code: Press the learning button on the module 9 times continuously, and the light flashes 5 times and then goes out.
2.Momentary Mode:Press Module learning button 1 time, the indicator light is always on, then press the remote control button, the indicator light flashes 3 times and then turns off , then the set is successful; If the code is not successful , the indicator lights out of the learning state after 10 seconds.
3.Toggle Mode:Press the Module Learning button 2 times, the indicator light always turns on; then press the remote control button, the indicator lights flicker 3 times and then off, then the set is successful; if the code has not been successful, the indicator lamp goes out of the study state after 10 seconds.
4.Latching Mode:Press the Module Learning button 3 times, the indicator light always turns on; and then press the buttons on the remote control, the indicator lights flicker three times and then off,then the set is successful.
5.Delay Off Mode:Press the Module Learning button 4(5/6/7) times,the indicator light always turns on; and then press the buttons on the remote control, the indicator lights flicker 3 times and then off,the set is successful.
Package Includes:
1Pcs x remote control , 1pcs x Switch Withcase;
Battery model: Lithium CR2016.
The product shipped out with default mode:Latching Mode! Just install it right.
About Working mode:
Momentary:Push the remote button, the relay connects, release the remote button, the relay dis-connects.
Toggle:Push once the remote button, the relay connects, push twice the remote button , the relay dis-connects.
Latching: Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Time delay mode:Push the remote control button, the relay connects, from when release the remote button, after 5s or 10s or 15s or 20s, the relay disconnect automatically.
Steps:
1.Clear Code: Press the learning button on the module 9 times continuously, and the light flashes 5 times and then goes out.
2.Momentary Mode:Press Module learning button 1 time, the indicator light is always on, then press the remote control button, the indicator light flashes 3 times and then turns off , then the set is successful; If the code is not successful , the indicator lights out of the learning state after 10 seconds.
3.Toggle Mode:Press the Module Learning button 2 times, the indicator light always turns on; then press the remote control button, the indicator lights flicker 3 times and then off, then the set is successful; if the code has not been successful, the indicator lamp goes out of the study state after 10 seconds.
4.Latching Mode:Press the Module Learning button 3 times, the indicator light always turns on; and then press the buttons on the remote control, the indicator lights flicker three times and then off,then the set is successful.
5.Delay Off Mode:Press the Module Learning button 4(5/6/7) times,the indicator light always turns on; and then press the buttons on the remote control, the indicator lights flicker 3 times and then off,the set is successful.
Package Includes:
1Pcs x remote control , 1pcs x Switch Withcase;
Battery model: Lithium CR2016.