[Fan and light 2 in 1] : One E26 Socket can support two uses for fan and light. The Ceilling Fan and the LED bulb 2 in 1 , so it is easy for you to replace the ceilling light by this fan light [Easy to install]: The Socket Fan light is easily for installing as a regular lightbulb, no need you install one new socket for the fan alone. If you had installed one E26 base socket for your lightbulb before,just use the installed socket is ok. We also offer you one new E26 socket for the fan light if you had no installed socket before. [1500Lum and 3000-6500 kelvins color]:The light is supper bright when highest brights for any dark room.20%-100% brightness smooth adjustable by Smartphone App and remote control. The color temperature selectable 3000K(eyes protect),4500K(natural color) and 6500K(cool white). [6 level speed wind and natural wind with super low noise]:18 inch Fan diameter,100RPM-500RPM fan speed selectable by remote control.the highest speed is about 20W.It is good enough for bedroom, kitchen, dining room, foyer, storage room etc.Magnetic levitation motor for the fan, so it is completely noise free. [Remote control and Smartphone App control with timer]:The fan light controlled by remote control or Smartphone app. There Main Power off button for the fan and light. Independent Power on/off button for fan. Independent button for Power on/off and color temperature selection and brightness adjustable for light.7 buttons for 1-6 speed and natural wind of the fan.Also there 1 hour,2 hours 4 hours and 8 hours timer by App,and 2 hours,4 hours by remote control. It makes you use the fan light Flexible. [One E26 Socket and One Extension Tube Included]:Convenient for users without E26 sockets had been installed before.Or the users who want to install the fan light in areas where other ceiling equipment affects the operation of fan lights. [2.4g Hz Remote Control and Smartphone APP]:The remote control distance about 100-500ft(30-150m ).The remote control and smartphone can be paircode with the fan. Then, the remote control signal has strong penetration, even you are in the next room, you can control the fan lights through the remote control or smartphone app. [Power switch directly control light and fan] If you no remote control or smartphone in hand,the fan light can be controlled by power switch directly.When you power on/off the fan light,there 5 working modes:1,natural white lighting,2,cool white lighting, 3,warm white lighting,4,fan run,5 natural white lighting+ fan run The product dimensions are 17.7 x 17.7 x 6.3" from blade tip to blade tip with 6 blades installed.
6 pieces blades makes the wind speed is uniform and soft.
The lampshade is made of matte acrylic material, the lighting is soft.
Short time press the light color button +/-control button on the remote control: the light switches between warm white, normal white, cold white smoothly
Short/Long time press the light brightness button +/-control button on the remote control: the light switches between 20-100% brightness smoothly
If you need to install an E26 base, please note that : the middle pole of the base should be connected to the L-wire of the power supply, and the pole connected to the thread should be connected to the N-wire of the power supply
The fan blades can be directly inserted into the slot of the fan light body without the need screws for installation. When dismantling, simply pull out the blades with force, without worrying about the blades being damaged.
When the fan lights switch between different working modes, there is a beep prompt.