［A Fine Replacement Sending Unit］ Sucicago Reed Switch Diesel Marine Fuel Tank Sending Unit is a Better Option Than the Traditional Lever Type Sensors. The Boat Fuel Tank Will not Effected by The Constant Movement Caused by Waves and Boat Rocking. It Will give an Accurate Indication of Fuel Level and the Fuel Gauge No Longer Bounces All Over The Place In Windy Wave Situations.
［Update Version］We Received Feedback From Customers Who Said the Smaller Sending Units As A Short Tank Requires Higher Sensitivity Than The Taller Tanks Do. Our R&D Has Redesigned :
10mm Resolution Range : 4”,5”,6”,7”
21mm Resolution Range: 8",9",10",11",12",13",14",15",16",17",18",19",20",22"
［Easily Understood Wiring Instructions］This Boat Fuel Level Sending Unit Comes With 1pc of NBR Mounting Gasket, 5pcs of Metric Screw and Installation Instruction. Install It With Ease! You will know how much Fuel, Diesel,Gasoline or Water left on Your boat/Truck/Camper! Signal Output: 240 ohms-33 ohms, Non-Linear Output, SAE 5 Hole Mounting Pattern ( NOT Equidistant )
［Body Material］ Stainless Steel. Sucicago Guarantees with 1 Year Limited Warranty & Free Lifetime Technical Support. ［Really Important to Know BEFORE You Order］
1) To Allow The Sender not Hit The Bottom of The Tank, The Length of Sender Should be 1" less Than The Depth of The Tank If Tank Is Plastic, And 0.5" Less Than The Depth of The Tank If Tank is Metal .
2)The Diameter of Float is 1.38"(35mm). If You Have to Drill the hole, Diameter 1.50"(38mm) Hole Would be Perfect. Sucicago Stainless Steel Fuel Gauge Sender Unit Is Much More Accurate and Reliable Than The Old Arm and Float Setup. Customer Can Purchase in Conjunction with a Sucicago Fuel Level Gauge or Water Level Gauge. They're Designed to Monitor The Fuel, Diesel,Gasoline or Water Level In The Tank.
This Gas Tank Sending Unit Will Also Work with Any Fuel/Water level Gauge with Signal Range American Standard output 240-33 ohm (Empty - Full).
Body Material : Stainless Steel
Cable: PVC
NBR.Gasket: 1pc
Metric Stainless Steel Screws: 5pcs
Mounting Methods: Standard SAE 5 hole pattern.
Protection Rank: IP67.
Output Signal: American Standard 240-33 ohms (240 ohms at empty , 33 ohms at full).
Resolution Range:
10mm for the length of Sucicago Sender 4”,5”,6”,7”
21mm for the length of Sucicago Sender 8”,9”,10”,11”,12”,13”
Package Information:
1 x Sucicago Fuel Sending Unit 1 x Gasket 5 x M5*0.8 Length(16mm) Screws 1x Sending Unit Installation
PROPER WIRING INSTALLATION:
-Connect Ground (Blue) Wire from Sucicago Sending Unit to a Common Grounding Hook-up.
-Connect Signal (Brown) Wire from Sucicago Sending Unit to Gauge Hook-up. If your Gauge Has Color Coded Hook-ups, Maintain This Coding As you Connect the Sender and Ground Wires.
［Update Version］We Received Feedback From Customers Who Said the Smaller Sending Units As A Short Tank Requires Higher Sensitivity Than The Taller Tanks Do. Our R&D Has Redesigned :
10mm Resolution Range : 4”,5”,6”,7”
21mm Resolution Range: 8",9",10",11",12",13",14",15",16",17",18",19",20",22"
［Easily Understood Wiring Instructions］This Boat Fuel Level Sending Unit Comes With 1pc of NBR Mounting Gasket, 5pcs of Metric Screw and Installation Instruction. Install It With Ease! You will know how much Fuel, Diesel,Gasoline or Water left on Your boat/Truck/Camper! Signal Output: 240 ohms-33 ohms, Non-Linear Output, SAE 5 Hole Mounting Pattern ( NOT Equidistant )
［Body Material］ Stainless Steel. Sucicago Guarantees with 1 Year Limited Warranty & Free Lifetime Technical Support. ［Really Important to Know BEFORE You Order］
1) To Allow The Sender not Hit The Bottom of The Tank, The Length of Sender Should be 1" less Than The Depth of The Tank If Tank Is Plastic, And 0.5" Less Than The Depth of The Tank If Tank is Metal .
2)The Diameter of Float is 1.38"(35mm). If You Have to Drill the hole, Diameter 1.50"(38mm) Hole Would be Perfect. Sucicago Stainless Steel Fuel Gauge Sender Unit Is Much More Accurate and Reliable Than The Old Arm and Float Setup. Customer Can Purchase in Conjunction with a Sucicago Fuel Level Gauge or Water Level Gauge. They're Designed to Monitor The Fuel, Diesel,Gasoline or Water Level In The Tank.
This Gas Tank Sending Unit Will Also Work with Any Fuel/Water level Gauge with Signal Range American Standard output 240-33 ohm (Empty - Full).
Body Material : Stainless Steel
Cable: PVC
NBR.Gasket: 1pc
Metric Stainless Steel Screws: 5pcs
Mounting Methods: Standard SAE 5 hole pattern.
Protection Rank: IP67.
Output Signal: American Standard 240-33 ohms (240 ohms at empty , 33 ohms at full).
Resolution Range:
10mm for the length of Sucicago Sender 4”,5”,6”,7”
21mm for the length of Sucicago Sender 8”,9”,10”,11”,12”,13”
Package Information:
1 x Sucicago Fuel Sending Unit 1 x Gasket 5 x M5*0.8 Length(16mm) Screws 1x Sending Unit Installation
PROPER WIRING INSTALLATION:
-Connect Ground (Blue) Wire from Sucicago Sending Unit to a Common Grounding Hook-up.
-Connect Signal (Brown) Wire from Sucicago Sending Unit to Gauge Hook-up. If your Gauge Has Color Coded Hook-ups, Maintain This Coding As you Connect the Sender and Ground Wires.