Package Including:5M COB led strip + 1pc Wireless Controller(battery not include) + 1pc Power Supply WS2811 horse running led strip is Low power consumption, Super-bright but running with low temperature,All the light spread and completely smooth, luminous very even Wireless Controller:Mini SPI LED strip controller with panel wireless remote control. Powered by CR2025 Battery (not included),Max control 2048 Pixels(IC),Speed/Brightness is adjustable,10 Kinds of different modes changable,With Double-side tape on the back,easy to install at anywhere Power Supply:We used high quality 110V 220V AC to DC 24V LED power supply,100% real power output. 1pc DC24V power supply can drive max 20 meters WS2811 horse running pixel led strip Application Making led screen,Rooms Staris Flashion Show.led wall, advertising board. Apply to hotel, KTV, bars, advertisement company, decoration company,the city lighting project, entertainment and leisure places lighting. Product Name: Addressable COB Led strip
LED Type: COB
IC Type: WS2811
LED Color: Warm White/White/Cold White/Dream Color
Working Voltage: DC 24V
Power: 12W-15W/M
PCB Width: 10mm(Warm White/White/Cold White) / 12mm(Dream Color)
Waterproof Rate: IP30 Non-Waterproof
Package: 5M/Roll
Connection:
Red Wire ---- DC24V (+)
Green Wire --- Digital Wire
White Wire --- GND wire (-)
RF Touch LED Controller
Working Voltage: DC 5-24V
Max Control Pixels <2048 Pixels
Effects Modes: 376 kinds of different modes.Most of effects are running water when you turn ON. Also with Pause and Auto-play function.
Battery Type: CR2025 ( The remote is not with battery)
8 Keys Function: ON/OFF , Speed UP/Down, Mode+/Mode-, MENU,
Brightness UP/Down, Touch color ring in the middle to adjust the static color. Remote Distance: 20 Meters
if u want to connect two or three strip together u need the adjust the pixel number of the controller then it can work together
How to adjust the pixel number ?
Step 1: Power Off the lights.
Step 2: Long press " MENU" 5 seconds enter into pixel setting menu
Step 3: Press "Mode+" to increase the pixels number,till the whole led strip are light ON. Press "Mode-" to decrease the pixel number.
Step 4: Press "ON/OFF" key to Save !
Default Factory pixel number is 305pcs, max increase to 2048pixels. If the led strip is more than 2048pcs pixels, just add another amplifier .
Power Supply
We used led power supply,with high quality power supply, 100% enough power outputs,stable and long-life span.
The Power : 200W
Input Voltage: 100-265V AC, widely voltage used.
Output Voltage: DC 24V