2-component acid-resistant epoxy mortar for the installation and grouting of ceramic tiles with joints of 1 to 15 mm width (3/64 in. to 19/32 in.) 2-component acid-resistant epoxy mortar for the installation and grouting of ceramic tiles with joints of 1 to 15 mm width (3/64 in. to 19/32 in.) Suitable for the acid-resistant installation and grouting of ceramic tiles and mosaics with 1 to 15 mm wide joints, on indoor and outdoor floors and walls; suitable for applications where the surfaces are exposed to aggressive chemical substances (see chemical resistance table) such as dairies, abattoirs, pubs, food factories in general When installing epoxy grout make sure to follow directions and use the proper tools listed in the instruction manual; mix the 2 parts with a small mixer on a drill at a low speed as to not heat up the grout but to mix it thoroughly; also use a green float that is for epoxy grout only Mixture life: approximately 1 hour at T = +23°C (73.4°F) recommended application temperature: recommended between +18°C to +23°C (64.4°F to +73.4°F) walkable after: 24 hours at T= +23°C (73.4°F); the surface can be commissioned after 7 days at a temperature of +23°C (73.4°F); at temperatures between +8°C and +12°C (46.4°F to 53.6°F), the product is highly consistent and difficult to apply Also recommended for grouting swimming pools or pools containing spring water; please see the Technical Data Sheet (TDS) for all fields of application Epoxy Elite EVO Acid-resistant 2-part epoxy mortar for the installation and grouting of ceramic tiles and mosaics with 1 to 15 mm joints, on indoor and outdoor floors and walls. Innovative new approach to Epoxy Mortar that enables a smoother matt finish. Commercial product that can be used as a non-sag setting material and grout product. Extremely easy to install and maintain. 2-part anti-acid epoxy mortar. Part A consists of a mixture of epoxy resin, fine-grain siliceous aggregates, pigments and specific organic additives. Component B consists of an innovative organic catalyst. The 2 parts, once mixed together, form a creamy mixture with excellent smoothness, also for no-drip vertical application. Once hardened, the product has ultra-high performance in terms of mechanical resistance.