Made of sturdy plastic and aluminum alloy, it is not only sturdy. Used to replace old or damaged telescopic handles instead of buying new luggage. Can be used as a telescopic handle on the guitar amplifier box, even if it weighs up to 80 pounds, it won't bend and works properly. Please make sure you have basic DIY skills and check the size and style of this lever before purchasing. It all depends on your size and whether there are square edges on the trunk handle you are replacing. Please be sure to measure whether your suitcase is suitable for our pull rod before placing an order
Color: Silver + Black
Material: Plastic + aluminum alloy
Product size: manual measurement error 1CM-2CM
The pure upper end rod after stretching the pull rod is about 50㎝
Pure lower end rod length is about 40㎝
The length of the middle part is about 5㎝
The diameter of the three different parts of the pull rod is about 1.8㎝/2.3㎝/2.7㎝
The hole spacing between holes in the holes is 6㎝
Top cover width: 15.5CM
Top cover height: 10CM
Base width: 15.5CM
The inner width of the rod is approximately: 9.5CM
The outer width of the rod is approximately: 15CM
Total length: 97CM
Product tube type: horizontal pipe
Product section number: 3 sections
Load bearing range: about 20-30KG
Suitable for: 20-inch trolley box
Features:
1. Made of sturdy plastic and aluminum alloy, it is not only sturdy and durable, but also beautiful.
2. Used to replace old or damaged telescopic handles instead of buying new luggage.
3. Can be used as a telescopic handle on the guitar amplifier box, even if it weighs up to 80 pounds, it won't bend and works properly.
4. Please make sure you have basic DIY skills and check the size and style of this lever before purchasing. It all depends on your size and whether there are square edges on the trunk handle you are replacing.
What are the types of pull rods?
The luggage tie rod is roughly divided into built-in tie rods and horizontal tie rods according to the installation position.
What is the difference between a built-in tie rod and a horizontal bar tie rod?
Built-in pull rod: Fixed with a base, and make sure that the base screw hole position is consistent with the hole position at the bottom of the original bag.
Horizontal strip: Fixed with a horizontal strip, and make sure that the horizontal screw hole position is consistent with the hole position on the back of the original luggage.
Three important parameters for purchasing built-in tie rods:
Color: Silver + Black
Material: Plastic + aluminum alloy
Product size: manual measurement error 1CM-2CM
The pure upper end rod after stretching the pull rod is about 50㎝
Pure lower end rod length is about 40㎝
The length of the middle part is about 5㎝
The diameter of the three different parts of the pull rod is about 1.8㎝/2.3㎝/2.7㎝
The hole spacing between holes in the holes is 6㎝
Top cover width: 15.5CM
Top cover height: 10CM
Base width: 15.5CM
The inner width of the rod is approximately: 9.5CM
The outer width of the rod is approximately: 15CM
Total length: 97CM
Product tube type: horizontal pipe
Product section number: 3 sections
Load bearing range: about 20-30KG
Suitable for: 20-inch trolley box
Features:
1. Made of sturdy plastic and aluminum alloy, it is not only sturdy and durable, but also beautiful.
2. Used to replace old or damaged telescopic handles instead of buying new luggage.
3. Can be used as a telescopic handle on the guitar amplifier box, even if it weighs up to 80 pounds, it won't bend and works properly.
4. Please make sure you have basic DIY skills and check the size and style of this lever before purchasing. It all depends on your size and whether there are square edges on the trunk handle you are replacing.
What are the types of pull rods?
The luggage tie rod is roughly divided into built-in tie rods and horizontal tie rods according to the installation position.
What is the difference between a built-in tie rod and a horizontal bar tie rod?
Built-in pull rod: Fixed with a base, and make sure that the base screw hole position is consistent with the hole position at the bottom of the original bag.
Horizontal strip: Fixed with a horizontal strip, and make sure that the horizontal screw hole position is consistent with the hole position on the back of the original luggage.
Three important parameters for purchasing built-in tie rods: