MG90S micro servo motor is the upgraded version form SG90 servo motor. Structural material: Metal copper teeth, hollow cup motor, double ball bearing. Metal Gear with less noise. Operating Speed（At no load）: 0.12±0.01 seconds / 60 degrees (4.8V); 0.11±0.01 seconds / 60 degrees (6.0V) For all kind of remote contro toys, some electronics DIY project based on Arduino, Raspberry Pi. Application：Fixed wing, Aircraft, Ship, Small robot, Mechanical arm and other models.
Specification：
Size: 22.9 x 12.2 x 28.5 mm（0.9*0.48*1.12in）
Weight: 12g
Operating Temperature: -10~50℃
Operating Voltage：4.8 ~ 6 V
Operating Speed（At no load）: 0.12±0.01 seconds / 60 degrees (4.8V); 0.11±0.01 seconds / 60 degrees (6.0V)
Running Current（At no load）：220±20mA (4.8V); 250±20mA (6.0V)
Stall Torque（At locked）：1.5±0.01kg·cm (4.8V); 1.8±0.01kg·cm (6.0V)
Stall Current（At locked）：700±50mA (4.8V); 900±50mA (6.0V)
Idle Current（At stopped）：4±1mA(4.8V); 4±1mA (6.0V)
Control System：To change the pulse width
Amplifier Type：Analog Controller
Operating Angle：90±5°（At 1000→2000 μs）
Left&Right Travelling Angle Deviation：≤3°
Centering Deviation：≤1°
Neutral Position：1500 μs
Dead Band Width：5 μs
Rotating Direction：Counter Clockwise（At 1500→800 μs）
Pulse Width Range：800→2200 μs
Maximun Travelling Angle：About 145°（At 800→2200 μs）
Three Line Definition：Dark grey：GND; Red：VCC 4.8~6V; Yellow：Pulse Input

Package included：
3 x MG90S Servo Motor
9 x Rudder disc
9 x Fixing screws