[Pressure Washer Sewer Jetter Kit]: The water jet drain cleaner can be used to remove indoor or outdoor drainage of many types, combined with any type of pressure washer, can easily flush obstacles and maintain flow. 1 x 50 FT Pressure Washer Hose, 3 x Button Nose - Orifice 4.0, 4.5, 5.5, 1 x Rotating Nozzle, 1 x M22-14 Solid Brass, 1 x Thread Seal Tape, 1 x 1/4 '' Quick Connector. [Durable Plumbing Jetter Hose]: Small outside diameter flexible and strong toughness sewer line hose with couplings, allowing hose and nozzles to fit through sewer line. PE tube, PVC cover, Dual-layer terylene reinforcement, which is very durable and can resist weather,oil, ozone and abrasion. [3 + 1 Sewer Jetter Nozzle]: 3 Button Noses, 1 front jet at 0° to clear the blockage in the pipe, 3 rear jets at 33° pushes forward and washes loose debris before. Orifice: 4.0, 4.5, 5.5. Rotating Nozzle rotates 3 rear jets at 33° for shot blasting, the water unblock pipe, clear and flush debris. Orifice: 4.5. [Widely Used]: Work with lots electric and gas-powered pressure washers up to 5800 PSI. The sewer jetter hose can be used for pressure washer pump with American standard M22-14 Solid Brass. It also can be connect to trigger gun or pressure washer wand with 1/4" quick connector. [Tips]: Always disconnect the accessory when finished using it. Do not leave the fitting unattended or under pressure when not in use. Twinkle Star Sewer Jetter Kit for Pressure Washer
Features:
Plumbing Jetter Hose is very durable and can resist weather,oil, ozone and abrasion.
3 Button Noses, 1 front jet at 0° to clear the blockage in the pipe, 3 rear jets at 33° pushes forward and washes loose debris before. Orifice: 4.0, 4.5, 5.5.
Rotating Nozzle rotates 3 rear jets at 33° for shot blasting, the water jet it into the blocked pipe, clear and flush debris. Orifice: 4.5.
Work with lots electric and gas-powered pressure washers up to 5,800 PSI.
Suitable for both hot and cold water.
Specifications:
Length: 50Ft
Weight: 6.03lbs
Maximum pressure: up to 5,800 PSI
Package include:
1 x 50 FT Pressure Washer Hose,
3 x Button Nose - Orifice 4.0, 4.5, 5.5, 1 x Rotating Nozzle,
1 x M22-14 Solid Brass,
1 x Thread Seal Tape,
1 x 1/4 '' Quick Connector.
Note:
Always disconnect the accessory when finished using it. Do not leave the fitting unattended or under pressure when not in use.