Replace Johnson Evinrude BRP outboard Fuel Pump The Non-oiling Pump Fit V6 60 Degree Looper Model's Motors 150-175hp For V6 motors, Double-diaphragm design and is slightly larger. This requires removing a small portion of the bracket It's made of plastic, so can easily be cut with tin snips or similar, usually without removal from the motor. Package Kits Include Fuel Pump with Aluminum bracket 5/16" hoses and zip ties detail Detailed mounting instructions Mix gasoline and oil 50:1 in the fuel tank (1 pint to 6 gallons of gasoline)

This replacement fuel pump kit fits V6 60° Looper models. 

It replaces the VRO pump mounted to the vapor tank/bracket system, mounting directly to the tank/bracket in place of the VRO pump using our custom-made bracket and custom aluminum hose fitting. Our custom fitting will not crack or deteriorate, as plastic fittings might, and is held securely in place by the tang extrusion on our proprietary pump bracket.

Detailed mounting instructions are here and are also included in the box with the pump kit. Also included extra pieces of hose, if needed, to reach everything, zip ties to secure the hoses, and a barb fitting to replace the original pulse limiter on the block (supplies higher volume pulse to pump).

This kit includes a pair of pumps working in series using the original VRO pulse hose (or longer piece if necessary) when mounted in place per installation guide above.

Older V6 motors (pre-VRO) also utilized 2 pumps working in series to meet the fuel volume requirements.

It attaches to the tank/bracket with 2 included screws and comes with a hose barb to replace the original pulse limiter to insure sufficient pulse strength for operation at all RPM ranges. The kits are  quality fuel line, Clamps on the metal hose barbs, and zip ties made specially for use with hoses, insuring a tight connection at all fitting.

You must pre-mix fuel & oil 50:1 in the fuel tank with this pump.