Small size, convenient to use, it can accurately measure distance Low voltage, low power consumption, High measuring precision, strong anti-interference ability Integrated with wire enclosed water-resistant sensor, suitable for wet, harsh measurement Widely used for horizontal distance measuring, obstacle avoidance, automatic control,security, industrial control, etc

Wiring:

+5V (power supply positive)
Trig (control) RX
(receive) TX
GND (power supply negative)

Basic Working Principle:

(1) Using IO port TRIG measuring distance, high level for at least 10uS.
(2) Module automatically sends eight 40kHz , automatically detects whether there is return .
(3) When there is return , through IO port output a high level, the duration of the high level is the time of ultrasonic from sending to returning.Test distance = (high level time * sound velocity (340m/S))/2;

    This module is simple to use, a port sends a high level of more than 10uS, then wait for high level output at receive port. Timer was enabled once there is output, and read time when this port becomes low level, which is the time of this measurement. Use the time to calculate distance. Constantly cycle measurement can reach your mobile measuring values.

    The ultrasonic timing diagram shows that you only need to provide a more than 10uS pulse , the module inside will send eight 40kHz cycle level and detect return . Output once detect return . The pulse width of is proportional to the measured distance.Thus calculate the distance with interval between sending and receiving .

Formula:

uS/58= cm    or     uS/148= inches;

Or:

Distance = high level time * sound velocity(340m/S)/2;

Suggested test cycle is more than 60ms, in order to prevent effect of transmitting on .
Package Includes:

1 x Distance Measuring Module and Sensor