【UP DOWN Light Ceiling Fan Remote Control Kit】 This handhold ceiling fan remote control kit with 3-Speed (LO/MED/HI/OFF) for fan speed control, UP and DOWN for light control. Note: the UP LIGHT is dimmable when you press it a long time, the DOWN LIGHT only controls light ON/OFF. No reverse button. 【Compatibility】This ceiling fan remote with Up Down light control kit compatible with Hampton Bay Hunter Harbor Breeze and others, suitable for most 120V 3-speed AC ceiling fan with up down lights, for UC7078T CHQ7078T UC7083T CHQ7083T Fan-HD. Light dimmer compatible with incandescent light bulbs and dimmable LED lights, some LED lights and all CFL lights are non-dimmable, light dimmer only supports the ON/OFF function. 【Powerful and Long-lasting Fan Receiver】The rated power of the receiver is 240W, which far beyond the general carrying power capacity, it allows you to access more light bulbs, greatly increase the life of the receiver. This receiver uses 2 upgraded relays, with the new component the dimming function of the relay is better than the thyristor. This upgraded receiver is smaller than the receiver which using thyristors. 【Easy to Install】Please follow the Instruction of Installation to install it. 1,Setting the codes on the remote and receiver, The default settings is 0000, and it is not recommended. 2,Installing receiver in ceiling fan. 3,Install a 9V battery(NOT INCLUDE) in the remote and there will be work. 【Packing】 Includes 1*Remote, 1*Remote Holder, 1*Receiver, 6*Wire nuts, 2*screws. The remote use a 9V Battery (NOT INCLUDE) for power supply. This remote controller is designed to separately control your ceiling fan light brightness/On/Off and fan speed.
The UP/DOWN LIGHT DIMMER button will control the light brightness dimmer and off.
There are four buttons (HI, MED, LO, FAN OFF) to control the speed of the fan and off.
The red indicator on the transmitter will light when one of the six buttons is pressed.

Need to Know Before Buying:
This remote control kit not have the function of reversal for the fan.
The light dimmer is compatible with dimmable LED, CFL, and incandescent light bulbs, non-dimming bulbs only have the on/off function.
If your fan have pull chain switch, before using the wireless remote control, use the switch to turn the fan speed to maximum and turn the fan light on. In this way the switch and the wireless remote control can be used together.

TROUBLE SHOOTING GUIDE
1. Fails to operate
a. Power to receiver?
b. Receiver wired correctly?
c. Fan manual speed control in highest position d. Light kit switch turned on ? e. Good battery in the transmitter?
f. Code set at exact same positions in both transmitter and receiver?
2. Won't operate at distance If transmitter operates fan/light kit when up close, but not at 20 feet away. Try placing the brown antenna wire higher, up through ceiling/outside the junction box.

Package included:
1 x Transmitter
1 x Receiver
6 x Plastic wire connector
2 x Screws
1 x Manual

NOTICE! Your ceiling fan and light kit assembly must meet the following requirements:
1. Do not use with solid state fans.
2. Electrical rating: 120v 60Hz 3.5A MAX.
Motor amps: 1.0 MAX.
Light watts: 240-(incandescent or ballast non-dimmer)