Structure: Steel Needle Drive System: Stepper Motor Maximum Cutting Range: 210mm x 2000mm Paper Width Range: 60mm - 330mm Contour Cutting Method: Supports Manual Contour Cutting System/Software Support: Windows System Win7-Win11 CDR/AI Cutting Pressure: 20-500gf Cutting Speed: 10-800mm/s Language: Chinese/English Switch Communication Port: USB, U Disk Power Supply: External Adapter, Input AC 100V-240V; 50HZ-60HZ Device Power: <100W Working Environment: 5 to 30°C to 80% R.H. (No Condensation) Movable Paper Holder: 2 Dimensions: Approximately 500x180x175mm Packaging Dimensions: Approximately 610x320x270mm Net Weight/Gross Weight Approximately: 4.7kg/6kg Cuttable Materials: Instant Stickers, Car Stickers, Back Adhesive Photo Paper, Transfer Film, Crystal Labels, Heat Transfer Printing, Film Sheets, Non-adhesive Sticker Paper, Tags, Reflective Film, Name Stickers, Large Head Stickers, TPU Film, Shrink Film 0.3mm (Paper Thickness within 300g) (Not All Materials Can Be Cut or Cut Through in One Pass)

- The new model features upgraded movable paper rollers, which can be adjusted to better stabilize the material during cutting. The older version had fixed rollers that could not be moved.

- An additional communication interface has been added, allowing support for USB flash drives (U-disk) for data transfer and file loading.

- A new screen display has been integrated for improved user interaction and operation.

- For A4 models, there is no positioning function available. If customers require positioning capabilities, we recommend choosing the A3 model, which supports material widths ranging from 60mm to 350mm.

Packing List:

1 x Main Unit 

 

1 x Power Adapter (110-240V)   

1 x Power Cable

1 x USB Data Cable

1 x USB Flash Drive

1 x Cutting Blade Holder, Set of Blades (45°)   

1 x Drawing Pen Holder, Pen Cartridge

2 x Cutting Mat   

1 x Warranty Card

Precautions

1. Protective material must be removed before turning on the cutting plotter. 

2. Check the label on the back side of the plotter to confirm that the rated voltage required by the plotter matches the voltage of the power base. 

3. Firstly make sure that the power switch is off, then plug the power supply into grounded power outlet. 

4. Please do not touch the power cord with wet hands to avoid electric shock. 

5. Please only use the power cord, data cable provided with this product, or manufacturer-approved replacements.