[Compatible model]：Fit for Ep son VS260 EB-992F EB-982W EB-E20 EB-E10 EB-E01 EB-FH06 EB-FH52 EB-U50 EB-W50 EB-W51 EB-W06 EB-X50 EB-X49 EX3280 EX5280 HC880 EH-TW5820 EH-TW5700 EH-TW710 EH-TW740 EH-TW750, Pro EX7280 /Pro EX9240 /Pro EX9230 /Powerlite Home Cinema U50 /Powerlite Home Cinema 880 /Powerlite Home Cinema 2250 /Powerlite Home Cinema 2200 /PowerLite E20 /PowerLite U50 /PowerLite W49 /PowerLite X49 /PowerLite 992F /PowerLite 982W /PowerLite 1288W Projector Lamp. [Perfect Quality Wick]：Stanlamp has been researching replacement bulbs for 13 years，we are committed to providing customers with long life, high brightness, stable output. [Long Life Time]：4000 (normal) / after 4001 hours (economy) can adjust to the ECO mode to save energy and use it for a long time.We will save you a lot of money on bulb replacements. [Easy to Install]：We have prepared an installation kit for you. You can use the tools we prepared for you to replace the light bulb quickly. After installation, you can enjoy the audio-visual feast . [After sale]:Stanlamp can make sure all the bulbs that have quality problems within six months, we will be responsible for the end.We strive to provide you with the best products and customer service.

Stanlamp Information:

Stanlamp has own factory and many experienced workers.Every lamp will be take strict quality test before leaving factory.So you don't need to doubt the quality.

Specifications:

Part number:ELP89 V13H010L89

Application:Business/Education/Home/School

Compatible:for EPSON EH-TW8300 EPSON 5040UBE

Package:

1 bulb with housing

1 Instructions sheet

Installation:

1.Turn off the projector and unplug the power cord.

2.Let the projector cool for at least an hour. The lamp is extremely hot immediately after use.

3.Loosen the lamp cover screw. Then slide the lamp cover off.

4.Loosen the two screws holding the lamp in place.

5.Hold the lamp as shown and pull it straight out.

6.Gently insert the new lamp. Then tighten its screws.

7.Replace the lamp cover, then tighten its screw.

Notes:

1.To avoid burns,allow the projector to cool for at least 60 minutes before replacing the lamp.

2.We provide excellent refund service with no any contidition with 13 hours feedback.If you have any questions,please contact us.We will try our best to sole your problem as soon as possible.