🔗What You Get: 12Pcs 3pin 10mm led strip connectors for strip to strip quick connection, gapless solderless terminal extension connection. 【Please make sure that the "+" and "-" poles of the light strips connected at both ends are consistent.】 🔗Specification: Those 3pin led connector adapters are suitable for waterproof or non-waterproof 10mm wide led strip light. Rated voltage: 0-36V; Rated current: 5A 🔗Easy to Use: The upgraded crystal 3pin rgb connectors are convenient and easy to use, and the premium transparent PC material makes your DIY LED light strips project reduce the dark area and awesome. 🔗Stable Operation: The sharp copper thorn design on the LED connectors can directly pierces clearly and align stably the contacts of the led light strips, no soldering, easy use, even slight swings and pulls can ensure a firm connection. [Note: If there is a protective layer of adhesive tape or plastic housing on the surface of the light strip, you need to tear off the adhesive tape or plastic housing on the connecting end part. ] 🔗Warm Tips: Be sure to pay attention to corresponding the "+" and "-" of the two light strip when installing the connection to avoid the destroy of the Lamp beads of the light strip. Please Check whether the contact of the connector is clean before installation, the cover of the connector is fastened before use.

Specification:

Working voltage: 0-36V

Maximum pin current: 5A

Interface type: 3pin

Working PCB width: 10mm

Working environment temperature: -20~50℃

Installation Tips:

1. Cut the strips to the length you need, and then fully open the clamp.

2. Push the strip in until it touches the backing, let the pins touch the connector, and then press down firmly to make sure the pins pierce the strap. (You can use tools such as pliers)

3. Reminder:

a,Please make sure corresponding the "+" and "-" nodes of  two light strip when installing the connection to  avoid the Lamp beads of the light strip be destroyed;

b. Please make sure that the contact point of the light strip is in contact with the copper sheet of the buckle;

c. When connecting the light strip, there is no need to peel off the adhesive on the back of the light strip.

Package Content :12Pcs 3pin quick connectors for strip to strip quick connection（universal for 10mm waterproof or non-waterproof 3pin light strips）