1. This connector is only limited to 2pin8mm bare board single-color flexible light strips. 2. The special connector for the new COB light strip replaces the traditional soldering method to achieve the fastest solderless connection. 3. Adopt transparent material, good light transmission, no dark area, continuous light source uninterrupted. 4. Easy to use, simple and easy to install, the maximum current is 6A. 5. Quickly connect the light strip, cut the light strip in the cutting area and connect it directly. When connecting, please pay attention to the corresponding positive and negative poles of the light strip and the connector. Use pliers or other tools to press and fix the pin pins to complete the installation.

Description of technical parameters:

【skills requirement】

1. Rated current: AWG20 6A Max, AWG22 4A Max (suitable for double-sided electroplating board, please ensure that the base copper thickness is 35/35 or above)

2. Rated voltage: 5V/9V/12V/18V/24V/36V/48V

3. Withstanding voltage: 500V

4. Temperature resistance: 80℃

5. Working temperature: -20℃ ~ +80℃

6. Salt spray test: neutral salt spray 24H

7. Permissible humidity: 15%~90%

8. Applicable light strip specifications: bare board COB light strips, or bare board SMD light strips with matching PIN pin spacing

[PCB line laying rules]:

1. No.1 copper foil design needs to be laid in a straight line within this range;

2. No.2 cut the middle line;

3. No.3 copper foil center distance design, symmetry with the outer width center of the light strip is 0.2 Max;

4. No.4 light strip design thickness 0.30 Max

5. The maximum height allowed for No.5 lamp bead, the tolerance range is ±0.2;

6. The total height of No.6 after adhesive backing: 0.55±0.1;

7. The minimum size of No. 7 lamp bead laying position;

8. No. 8 The design requirements for the outer width of the light strip;

The symmetry between all lamp beads and the outer width center of the lamp strip is 0.5 Max