Simple operation, no welding - The special led light connectors for the new COB light strip replaces the traditional soldering method and realizes the safest and fastest solderless connection method. It is small, light, and easy to operate,work for 5V/9V/12V/24V COB LED Strip Lights. Selected transparent material, more durable - Transparent PC material, no dark area, no color temperature change, tinned phosphor copper terminal, anti-oxidation, safer and more durable. Stable connection and no falling off -The innovative connection structure makes the connection between the light strip and the connector have a better bite force, making the connection stable and not easy to fall off. Easy connection, no light shielding - Easy to use, no need for welding, just plug it in and press it to use, and the continuous light source is uninterrupted. WARM TIPS - Before pressing the connection, pay attention to check whether the positive and negative poles of the light strip are consistent with the other end, Only when it is connected correctly can it work normally, and the wrong light bar will not light up; It's only compatible with 8mm wide COB LED strips, not for 10mm board width (or other sizes); Compatible with bare board COB and SMD light strips, PCB width 8MM wide 2PIN light strips, maximum current: 6A

Description of technical parameters:

【skills requirement】

1. Rated current: AWG20 6A Max, AWG22 4A Max (suitable for double-sided electroplating board, please ensure that the base copper thickness is 35/35 or above)

2. Rated voltage: 5V/9V/12V/18V/24V/36V/48V

3. Withstanding voltage: 500V

4. Temperature resistance: 80℃

5. Working temperature: -20℃ ~ +80℃

6. Salt spray test: neutral salt spray 24H

7. Permissible humidity: 15%~90%

8. Applicable light strip specifications: bare board COB light strips, or bare board SMD light strips with matching PIN pin spacing

[PCB line laying rules]:

1. No.1 copper foil design needs to be laid in a straight line within this range;

2. No.2 cut the middle line;

3. No.3 copper foil center distance design, symmetry with the outer width center of the light strip is 0.2 Max;

4. No.4 light strip design thickness 0.30 Max

5. The maximum height allowed for No.5 lamp bead, the tolerance range is ±0.2;

6. The total height of No.6 after adhesive backing: 0.55±0.1;

7. The minimum size of No. 7 lamp bead laying position;

8. No. 8 The design requirements for the outer width of the light strip;

The symmetry between all lamp beads and the outer width center of the lamp strip is 0.5 Max