This is for Umbilical cable management PCBs for the Voron 0. All JST and Micro-Fit connectors are installed with a template by hand to get an even and straight layout for the connectors. If using the chamber thermistor you will also have to find pins to connect it to on your mainboard. Because there are a variety of different boards being used this will vary. On the SKR you can use the MOSI and GND pins on the SPI headers for your thermistor connection. Installation Notice: Please pay attention to distinguish the positive and negative poles.The default red is positive, black is negative, if the colors are the same, the positive and negative electrodes are not distinguished. Producet Function: Voron V0.1 PCB set Complete Toolhead Frame Board kit has 2 PCBs loaded on V0.1 (Frame PCB and Toolhead/Hotend PCB Board), facilitates cable management and routing by connecting with an Integrated cable.Simple to use,Stable and reliable,Easy maintenance. Usage Scenarios: In design, when replacing or maintaining the hotend, the wire is very short and complicated, and it is inconvenient. This product can make the hotend directly and completely removed for easy maintenance. VORON V0.1 UMBILICAL FRAME TOOL for HEAD Include Chamber Temperature Thermistor And Support umbilical cordFeatures:brand new and If using the chamber thermistor you will also have to find pins to connect it to on your mainboard. Because there are a variety of different boards being used this will vary. On the SKR you can use the MOSI and GND pins on the SPI headers for your thermistor connection.Installation Notice: Please pay attention to distinguish the positive and negative poles.The default red is positive, black is negative, if the colors are the same, the positive and negative electrodes are not distinguished.Producet Function: Voron V0.1 PCB set Complete Toolhead Frame Board kit has 2 PCBs loaded on V0.1 (Frame PCB and Toolhead/Hotend PCB Board), facilitates cable management and routing by connecting with an Integrated cable.Simple to use,Stable and reliable,Easy maintenance.This is for Umbilical cable management PCBs for the Voron 0. All JST and Micro-Fit connectors are installed with a template by hand to get an even and straight layout for the connectors.Usage Scenarios: In design, when replacing or maintaining the hotend, the wire is very short and complicated, and it is inconvenient. This product can make the hotend directly and completely removed for easy maintenance.Specifications:Material：PCBSize: approx. 12.1x3.6cm/4.76x1.42inPackage Includes:1Set x Voron 0.1 BoardNote:Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!