Diesel Engine: Powerful 4-cycle water pump 2.3KW engine with a displacement of 196cc makes the rotational speed up to 3600rpm and the flow rate up to 131.23ft ³/h, which can quickly pump water from rivers or ponds. With a suction height of 22.97ft and a total lift height of 85.3ft, which allows you to irrigate your farmland effortlessly and increase efficiency Long-Lasting Durability: Trash Water Pump is built to last with its tough aluminum alloy pump body and impeller. With the portable rectangle design for better stability. Also with inner filter to help prevent clogging of the machine, and reduce cleaning trouble. Large Inlet&Outlet: The 3-inch inlet and outlet make the water transfer pump easy to connect to a water pipe, allowing for a high flow rate. Perfect for your pools ponds water transfer. Large Capacity: The fuel tank has a capacity of 1.06 gal and can be operated for 2 hours after refueling, avoiding the burden of frequent refueling. Application: Diesel engine water pump can be used in vegetable garden and flower garden pumping and irrigation, field pumping and drainage work, and so on. It can be used in pools river ponds, reservoirs, rivers, and other water-lifting projects.

More Details

Rectangular Frame: It can make the machine more stable and not easy to shake when running.

T-Shaped Starting Handle: It is easy to grip and pull to start the engine.

Single Cylinder: It allows the crankshaft to rotate at a more even angular speed and the engine to run smoother.

Inlet Filter: It can help clean impurities in water, prevent clogging of the machine, and reduce cleaning trouble.

Large Inlet&Outlet: The 3-inch inlet and outlet make it easy to connect to a water pipe, allowing for a high flow rate.

 

How to Operate

Ⅰ. Lay the machine flat and fill it with oil, just enough to have oil dripping out(too much/too little oil will affect operation).

Ⅱ. Add 0# diesel fuel.

Ⅲ. Fill the pump head section with water just until there is water overflowing from the spout.

Ⅹ. Twist the red switch (turn to ON position).

Ⅴ. ①Adjust the throttle switch to the left.

② Adjust the air vent to the left.

③Adjust the oil switch to the right.

Ⅵ. Pull a small section of the pull disc line out first, and then pull the pull disc quickly to start the machine.

Ⅶ. Connect the water inlet pipe.

Ⅷ. Connect the water outlet.

 

Specification

Assembly Required: Yes

Material: Aluminum

Process: Die-casting

Engine Type: Four-stroke, Air Cooling, Single-cylinder

Power Source: Diesel-powered

Ignition Mode: Compression Ignition

Starting Method: Hand-pull start

Fuel Type: 0#

Displacement: 196CC

Fuel Tank Capacity: 4L/1.06Gal

Full Fuel Running Time: 2H

Lubrication Way: Splash Lubrication

Lubricating Oil Capacity: 0.8L/0.21Gal

Lubricant Type: 10w40

Engine Power: 2.3 kW

Speed: 3600rpm

Max Suction Lift: 7m/22.97ft

Max Lift: 26m/85.3ft

Max Flow: 40 m³/131.23ft ³/h  

Noise: 75dB

Inlet/Outlet Diameter: 7.6cm/3in

Water Pipe Length: 7.5m/24.61ft

Product Size: 51.5*39.5*42.5cm/20.28*15.55*16.73in                          

Gross Weight: 34.68kg/76.46lbs

Net Weight: 30.44kg/67.11lbs

Package Size: 52*41*44.5cm/20.47*16.14*17.52in

Package Included

1*Water Pump

1*Water Pipe

1*English&German&French&Portuguese Manual

All Accessories for Assembly