1.Product Specification--Model: ER14505; Voltage: 3.6V; Capacity: 2700mAh; Size: AA; Dimension(DxH): 14.5*50.5mm/0.55*1.988 inch. DO NOT Charge battery. 2.Wide Application--ER14505 batteries are suitable for wireless alarms, security devices, dog collar, memory back-up, real-time clocks, electronic toll collection, electric energy meters, water meters, gas meters, calorie meters and more. Most suitable for low power consumption devices. 3.Reliable Performance--Less than 1% self-discharge rate per year at room temperature. Operates reliably in temperatures from from -55℃ to + 85℃（-67℉-185℉）. 4.Note--Lithium thionyl chloride battery has a passivation characteristic. Therefore, we highly recommend customers use the battery within approximately 2-3 months, depending on the storage condition to receive optimal performance. It is highly recommended that you purchase as many as you need. 5.Quality Assurance--Rigorously tested for performance. If you have any questions or concerns regarding our products, please send us a message and we’re happy to help.

Description:

Although ViCep ER14505 battery has a shelf life of 10 years (under special storage conditions), we advise customers not to store batteries for a long time due to the passivation characteristic. We strongly recommend customer to use the battery within 2-3 months for optimal performance. If you connected the battery to your device and it appears to be "discharged" or "half charged", it is usually due to delay or passivation of lithium battery voltage. The battery can generally recover after being started.

What if your battery doesn't work when connected to the device?

1. Test the OCV(Open Circuit Voltage). You can use the multi-meter to test the voltage. Standard voltage should be no less than 3.6V. If your battery is lower than 3.6V, please tell us.

2. Test loading voltage. The loading voltage should be around 3.2V. If your loading voltage is higher than 3.2V, the battery is in good condition. Due to the passivation characteristic of lithium thionyl chloride, your loading voltage may not reach 3.2V immediately. You can connect the battery with a resistor and activate it with a multimeter. When the loading voltage of the battery reaches 3.2V, then the activation is successful and the battery can be used.

3. If the battery fails to activate or is still unusable after activation, please tell us for help.

Specification:

1. Non-rechargeable

2. Battery capacity: 2700 mAh

3. Working voltage: 3.6 V

5. Temperature range: -55℃ to + 85℃（-67℉-185℉）

6. Dimension(DxH): 14.5mmx50.5mm

8. Weight: 19 g

NOTE:

1. Thoroughly read the product datasheet before use, inaccurate handling may cause leakage, heat, smoke, explosion, or fire, causing device trouble or injury.

2. DO NOT recharge, short-circuit, puncture, disassemble, deform, heat, incinerate, or place the battery near a direct flame. This battery contains flammable materials such as lithium and organic solvent and performing any of the above actions could cause it to ignite explode or become damaged.

3. DO NOT over-discharge, do not force discharge. In case the battery is over-discharged battery has potential of explosion. In case battery is over discharged, when connected with exterior power source or connected with other batteries in series, explosion may occur.

4. Keep this battery out of the reach of children. If it is swallowed, contact a physician immediately.

5. When storing a battery or throwing it away, be sure to cover it with tape. If the battery is contacted with other metal objects, it could cause fire or become damaged.

6. Insert the battery with the "+" and "-" ends correctly oriented.

7. Do not mix use old, new or different brand or type of battery.

8. Do not solder the battery directly.

9. Avoid storing the battery in direct sunlight, or in excessively hot and humid place..

Application:

wireless alarms, security devices, dog collar, memory back-up, real-time clocks, electronic toll collection, electric energy meters, water meters, gas meters, calorie meters and more