USA BASED, DESIGNED & TESTED: Our LED Trailer Light Set has features that others don't. Bright IP67 waterproof LED lights with true marine tinned wire. Designed to last and tested in tough saltwater conditions. Stainless hardware and heat shrink butt connectors. Bright and safe, DOT Compliant. EASY TO UPGRADE: Our LED trailer light set comes with all the hardware needed to install. Upgrade to our IP67 sealed waterproof lights that are saltwater submersible tested. Our marine light set comes with stainless mounting hardware, heat shrink connectors, and tie wraps to help make an easy install. IP67 WATERPROOFING: Our marine LED trailer light set is specially sealed to resist moisture and saltwater. Many customers use these lights on their aluminum trailers to handle saltwater conditions. Our 12V red light is very bright with turn, brake, and running light capability . Our sealed and submersible led light set is designed to survive in tough saltwater boat trailer conditions. EXCEPTIONAL QUALITY: We are a USA based (Florida) family owned business that designs high quality saltwater marine grade boating products. We provide expert level tech support. We design and install these products everyday here in Florida. All our products feature an industry leading no hassle warranty with a 100% customer satisfaction guarantee. PLEASE WATCH THE PRODUCT VIDEO FOR DETAILED INFORMATION
PRODUCT DEMONSTRATION Our LED boat trailer light set is designed to last with it's sealed waterproof submersible design. Saltwater tested IP68 Rated Lights that are DOT SAE Approved for trailer use. Our lights have evening running light capability and turn and brake capability. Our lights feature upgraded marine tinned copper wire that will not quickly degrade like the majority of wire on the market. Designed to fit in a low profile sleek configuration. Our two light set comes with everything you need to install. Stainless hardware, heat shrink butt connectors and wire ties to secure any excess wire. 1)The YELLOW wire light is installed on the DRIVER side with the CLEAR LENS facing down to illuminate a license plate. The GREEN wire light is installed on the PASSENGER side. Slide each stainless bolt into the appropriate slots on the rear of each light. Insert the bolts into and through the trailer frame then add the spring washer and stainless bolt. Be mindful of the wires exiting from behind the light. THERE ARE WIRE RELIEF SLOTS ON THE SIDE AND BOTTOM OF EACH LIGHT TO PREVENT WIRE DAMAGE. Once fitment is confirmed tighten the rear nuts to secure lights in position. Once the light is installed, connect the wire. There are three color wires on each light (White, Brown, Green or Yellow). FOLLOW: WHITE WIRE = Ground Wire, commonly connected to the trailer frame. Use included stainless screws if needed. If your ground wire is run separately from the front of the trailer use the included heat shrink butt connector for each side (not common) B- BROWN WIRE = Tail / Running Lights (On most trailers if using existing wiring, connect to BROWN COLOR WIRE on each side C- YELLOW WIRE = Brake Stop + Turn Signal Driver Side / Left side connect to YELLOW D- GREEN WIRE = Brake Stop + Turn Signal Passenger Side / Right side connect to GREEN USE THE INCLUDED HEAT SHRINK BUTT CONNECTORS TO MAKE CONNECTIONS WHEN POSSIBLE. Use a safe heat source to seal connections once light function is confirmed working properly. TEST TRAILER LIGHTS TO CONFIRM CORRECT WIRING & ALL FUNCTION CORRECTLY. Use included tie wraps to secure loose wires. It is always good practice to check and confirm proper function prior to each use of the trailer for evening running lights, turn signal, and brakes functions.IP68 Rating - Internal LED Housing Waterproof Sealed (Water may enter the housing this is not an issue, LED’s are separately sealed)Voltage: 10-13.5vDC
PER EACH LIGHT = Current Draw (.29A@12.5V)

Watts: 3.6 Watts at 12.5VMarine Grade Tinned Wire
Stainless Mounting Screws Included
Blue Heat Shrink Connectors Included
Tie Wraps Included For Wires