Genuine Plus TM3 Wayne Dalton Replacement Spring Parts - Spring(s) only, plastic and metal tubes not included. Torquemaster Plus TM3 TMII Spring Winding End - hexagon shaped end Typically TM PLUS TM3 TMII Springs are found on doors manufactured after February 2007 Torquemaster PLUS / 7 ft high / Between 60 - 69lbs - Single Right Hand Spring What’s Included: Includes Spring and Express Garage Doors installation manual with spring orders fulfilled by Express Garage Doors. Wayne Dalton Torquemaster Spring - Torquemaster PLUS / 7 ft high / Between 60 - 69lbs - Single spring. Heavy duty 10,000 high cycle life replacement springs for Wayne Dalton Garage Doors using the torquemaster Plus TM3 TMII style spring system. This specialty spring is made only by Wayne Dalton for their Torquemaster TMS garage door system. To order, you must know the height and weight of your garage door. Measure door height or find the label on the metal spring tube listing your door dimensions. For doors 6'6" - 7'5" choose 7ft height. For doors 7'6" - 8'2" choose 8ft. The most important information when ordering a spring is your garage door balance weight. Springs are specifically rated for a range of door weights, so this detail is required to receive the correct spring replacement. Usually the weight is listed on a label located on the metal tube. If it isn't you can use a bathroom scale to weigh your door. Make sure all spring tension is release prior to weighing. The cables must be fully slack on both sides to insure you are getting the full weight on the scale. Once you have the weight, select the weight range that your door weight falls within. If you select a higher or lower weight than your actual door weighs, the spring you receive may not work.If you select a higher or lower weight than your actual door weighs, the spring you receive may not work.