OE Number 83071AJ010 Fitment: for Subaru Legacy 2.5L 2010-2012, for Subaru Legacy 3.6L 2010-2012, for Subaru Outback 2.5L 2010-2012, for Subaru Outback 3.6L 2010-2012. If the newly installed switch button does not work most likely because the vehicle still recognizes the old switch, the following operations are required. 1. Press the left front door button (ie the button that controls the driver's seat window) down to the bottom and stay for 5~8 seconds. 2. When the button is lowered for 5~8 seconds, please push the button up to the end and stay for 5~8 seconds, then turn off the vehicle and restart the vehicle to complete the match. Placement on Vehicle: Front Left Driver Side Button Function: Window Control, Window Lock/Unlock, Door Lock/Unlock. Good Performance: Quality plastic housing, not easy cracking, durable, according to factory specifications, good match to the car. Note: ①Please confirm the OE number, model, year match your vehicle;②Please confirm the pin number and position are the same as the switch; ③Please install at flameout status, if it stops working after a period of work, you need to reoperate the steps again. Specifications:Color: Black
Material: Plastic
OE Number: 83071AJ010
Pin Number: 19
Size: 16.8x5.1x4.9cm / 6.61"x2.01"x1.93"(L*W*H)
Hole: Size: 5mm / 0.20"

Fitment:
for Subaru Legacy 2.5L 6MT Prem Sedan 2010-2012
for Subaru Legacy 2.5L 6MT Sedan 2010-2012
for Subaru Legacy 2.5L CVT Limited Sedan 2010-2012
for Subaru Legacy 2.5L CVT Prem Sedan 2010-2012
for Subaru Legacy 2.5L CVT Sedan 2010-2012
for Subaru Legacy 2.5L TURBO 6MT GT Limited Sedan 2010-2012
for Subaru Legacy 2.5L TURBO 6MT GT Prem Sedan 2010, 2011
for Subaru Legacy 3.6L 5AT R Limited Sedan 2010-2012
for Subaru Legacy 3.6L 5AT R Prem Sedan 2010-2012
for Subaru Legacy 3.6L 5AT R Sedan 2010-2012
for Subaru Outback 2.5L 6MT Base 2010-2012
for Subaru Outback 2.5L 6MT Prem 2010-2012
for Subaru Outback 2.5L CVT Base 2010-2012
for Subaru Outback 2.5L CVT Limited 2010-2012
for Subaru Outback 2.5L CVT Prem 2010-2012
for Subaru Outback 3.6L 5AT R 2010-2012
for Subaru Outback 3.6L 5AT R Limited 2010-2012
for Subaru Outback 3.6L 5AT R Prem 2010-2012

Installation Steps:
Firstly confirm your vehicle at flameout status.
Use a skid to pry the old switch out carefully.
Pull out the plug from the old switch.
Connect the new switch to the wiring harness.
Finally, install it into the bezel bracket.

Note:
Please confirm the pin number and position are the same as the switch.
Please install at flameout status, if it stops working after a period of work, you need to reoperate the steps again.

Package Includes:
1 x Car Power Window Switch