This remote switch remotely controls up to 2 electrical devices on the aircraft model through a switch channel on the remote control Only one relay can be closed at a time Package: 1x Electronic Switch Controller Note:
Only one relay can be closed at a time
The maximum current of each relay switch is 10A
Only support 5V voltage receiver, otherwise the module may be damaged. If the receiver and servo use high voltage system, a step-down module should be added to the module.
Description:
Small in size and lightweight
This remote switch remotely controls up to 2 electrical devices on the aircraft model through a switch channel on the remote control
This device does not require calibration and can be accurately compatible with various brands of remote control equipment.
Use receiver power supply, completely isolated from external power supply, external power supply, only for controlled equipment.
1 channel servo signal input, control 2 way electronic switches
220V maximum controlled voltage
2-way outputs
Compatible with all brands of remote control devices without calibration
Application range:
Remote launch model rocket launch
Remote control model
Control of weapon system like real machine
Headlight control of model aircraft
Control of various remote switching systems
Control of various remote switching systems
Typical application:
Connection:
Plug the signal input cable into an idle receiver channel, which corresponds to a switch on the remote control.
Connect the control switch and equipment
Trigger:
(Take the throttle channel as an example) Turn the throttle stick on the remote control to full throttle, and a relay is closed (that is, the wires at both ends are connected). Turn the throttle stick on the remote control to half-throttle. Both relays are not closed (both are not turned on). Turn the throttle stick on the remote control to the minimum throttle, and the other relay is closed (that is, the wires at both ends are connected).
Package:
1x Electronic Switch Controller
Only one relay can be closed at a time
The maximum current of each relay switch is 10A
Only support 5V voltage receiver, otherwise the module may be damaged. If the receiver and servo use high voltage system, a step-down module should be added to the module.
Description:
Small in size and lightweight
This remote switch remotely controls up to 2 electrical devices on the aircraft model through a switch channel on the remote control
This device does not require calibration and can be accurately compatible with various brands of remote control equipment.
Use receiver power supply, completely isolated from external power supply, external power supply, only for controlled equipment.
1 channel servo signal input, control 2 way electronic switches
220V maximum controlled voltage
2-way outputs
Compatible with all brands of remote control devices without calibration
Application range:
Remote launch model rocket launch
Remote control model
Control of weapon system like real machine
Headlight control of model aircraft
Control of various remote switching systems
Control of various remote switching systems
Typical application:
Connection:
Plug the signal input cable into an idle receiver channel, which corresponds to a switch on the remote control.
Connect the control switch and equipment
Trigger:
(Take the throttle channel as an example) Turn the throttle stick on the remote control to full throttle, and a relay is closed (that is, the wires at both ends are connected). Turn the throttle stick on the remote control to half-throttle. Both relays are not closed (both are not turned on). Turn the throttle stick on the remote control to the minimum throttle, and the other relay is closed (that is, the wires at both ends are connected).
Package:
1x Electronic Switch Controller