This LED strip light controller is used to control LED lights with lighting effects, with 76 kinds of pattern effects, beautiful and smart; Up to 2048 pixels. The mini whited led strip light controller has three leads. Red represents the positive power cable (VCC), white represents the ground cable (GND), and green represents the signal cable (DIN). The other side is connected to the positive terminal of the external DC power supply, with red being positive and black being negative. (External DC power supplies both the microcontroller and the light string) This 3Pin RGB Led controller cable has 3 buttons: MODE+: Forward select Mode effect; SPEED: Cycle selection speed; MODE- Select backward mode effect; MODE+ and MODE-: Press at the same time and release at the same time to enter automatic mode. Stable performance, good operation, simple and convenient wiring. Before power-on, check whether the power supply is consistent with the working voltage of the controller, and ensure that there is no short circuit between the connecting cables. Support IC: WS2801, WS2811, LPD6803, LPD8806, TM1809, UCS1903, UCS9812, APA102, APA104, widely used in the hall, building special, indoor, outdoor and other places. This is a new monochrome LED controller, the product is powerful, small size, presents a variety of special dynamic mode, for the monochrome LED decoration brings new applications. In addition, it can be used as an LED dimmer. You can easily change dynamic mode, speed and brightness by pressing three keys in its ultra-thin body. It also has automatic memory function. It is the best companion for LED light strips.
Microcontroller and light string connection: the three leads should be connected respectively. Generally, the red, white and green of the microcontroller are connected with the positive, signal and negative correspondence of the light string.
Then the red wire is connected to the positive pole of the external DC power supply, and the black wire is connected to the negative pole of the external DC power supply, that is, the external DC power supply supplies power to both the microcontroller and the light string. Before powering on the controller, check whether the power supply is consistent with the operating voltage of the controller (5V or 12V) and ensure that there is no short circuit between cables. The microcontroller has three buttons.
Operating voltage: 5V, 12V, 24V DC voltage input;
Power consumption: less than 1W.
Controllable pixel points: 2048 pixel points Current support IC: WS2801, WS2811, LPD6803, LPD8806, TM1809, UCS1903, UCS9812, APA102, APA104;
Note: Confirm the power supply voltage before powering on the device.
Package includes: 2*LED Strip lights controller cable