WEATHER RESISTANT - The lensed optics reinforces beam of our Photoelectric Beam Sensor strengthens & provides excellent immunity to false alarms due to rain, snow, mist, etc ACCURATE & RELIABLE - Detecting Range of photoelectric beam sensor is about 100meters outdoor and 300meters indoor With twin infrared beams provide reliable perimeter security, minimizing false alarms from falling leaves, birds, etc AUTOMATIC ADJUSTMENT - The transmit power of infrared beam sensor will be adjusted automatically according to the environmental conditions, which greatly extends the life of the launching tube, while lowering power consumption ATTACHED FUNCTIONS - Holographic spot real-time report Unique displacing receiving, transmitting parts with big power Full function checking, self-adaption in environment and trouble locking, 984Ft Indoor & 328Ft Outdoor Detecting Range DIFFERENCE NOTICE - Please allow 1-3mm measurement difference due to manual measurement and a certain degree of color difference caused by camera lenses, different phone screens, and different monitors Features:
1.Infared Detector ONLY, other devices are NOT included.
2.The detector itself with NO siren or alarm function.
3.Used for motion detection and alarm signal sending.
4.Works with existing Security System.
5.Anti tamper function.
6.Strong anti-interference ability.
7.Professional optical filtering lens.
Principle:
1.Install them at the opposite positions.
2.Then there is a infrared area between these two detector parts.
3.When someone passes the infrared region for an adjusted response time, the detector will send alarm signal to the security alarm host (which not included here).
4."Install Distance(Max.)" in the following chart means the maximum install distance between these two detector parts.
Specification:
Model: ABT-100
Type: Double Beam
Install Distance(Max.): Outdoor 100m; Indoor 300m
Survey Way: Lights Covered At The Same Time
Light Source: Infrared LED
Response Speed: 50~700m/sec
Alarm Output: Transmit Contact Output 1C
Contact Capacity: DC 30V 0.5A max
Power Supply Voltage: DC10.5~24V
Current Consumption: 65mA Max.
Temperature Scope: -25~55C
Forestall Disassemble: Contact Output 1b DC 30V 0.5A max.
Light Adjusting Angle: Horizontal 180°+/-90°; Vertical 20°+/-10°
Deal With Frost & Fog: Ultrasonic Wave Implement
Size (Each One): 16x8x8cm/6.3"x3.1"x3.1"(L*W*T)
Weight: 12.8oz/pc
Package Content:
1 Pair x Active Infrared Detector
1 Set x Mounting Parts
Notice:
1.Since transmit power of this product is high, there may be no detection response when the transmitter and receiver are too close, please extend their distance to more than 1M and try again.
2.When the actual installation distance is too close and causing the situation of insensitivity, the condenser lens in the transmitter and receiver can be removed to increase the sensitivity.
1.Infared Detector ONLY, other devices are NOT included.
2.The detector itself with NO siren or alarm function.
3.Used for motion detection and alarm signal sending.
4.Works with existing Security System.
5.Anti tamper function.
6.Strong anti-interference ability.
7.Professional optical filtering lens.
Principle:
1.Install them at the opposite positions.
2.Then there is a infrared area between these two detector parts.
3.When someone passes the infrared region for an adjusted response time, the detector will send alarm signal to the security alarm host (which not included here).
4."Install Distance(Max.)" in the following chart means the maximum install distance between these two detector parts.
Specification:
Model: ABT-100
Type: Double Beam
Install Distance(Max.): Outdoor 100m; Indoor 300m
Survey Way: Lights Covered At The Same Time
Light Source: Infrared LED
Response Speed: 50~700m/sec
Alarm Output: Transmit Contact Output 1C
Contact Capacity: DC 30V 0.5A max
Power Supply Voltage: DC10.5~24V
Current Consumption: 65mA Max.
Temperature Scope: -25~55C
Forestall Disassemble: Contact Output 1b DC 30V 0.5A max.
Light Adjusting Angle: Horizontal 180°+/-90°; Vertical 20°+/-10°
Deal With Frost & Fog: Ultrasonic Wave Implement
Size (Each One): 16x8x8cm/6.3"x3.1"x3.1"(L*W*T)
Weight: 12.8oz/pc
Package Content:
1 Pair x Active Infrared Detector
1 Set x Mounting Parts
Notice:
1.Since transmit power of this product is high, there may be no detection response when the transmitter and receiver are too close, please extend their distance to more than 1M and try again.
2.When the actual installation distance is too close and causing the situation of insensitivity, the condenser lens in the transmitter and receiver can be removed to increase the sensitivity.