Please confirm fitment to your headlight based on our second picture. If it doesn't fit, you can search our store for products that fit your headlight. Fitment: Fit for 2022-2024 B-MW G01 G02 F98 F97 LCI X3 30eX 30i 30iX M40iX X4 30iX M40iX LED Headlight. EUE Spec. : BMW X3 18d 20dX 20i 20iX 30dX 30eX 30iX M40dX M40iX; X4 20dX 20iX 30dX 30iX M40dX M40iX; USA Spec. :BMW X3 30eX 30i 30iX M40iX X4 30iX M40iX OEM Number: Left Side: 63115A0E623, 63115A0E625, 5A0E623, 5A0E625,63 11 5 A0E 623, 63 11 5 A0E 625, 5 A0E 623, 5 A0E 625; Right Side: 63115A0E624, 63115A0E626, 5A0E624, 5A0E626, 63 115 A0E 624, 63 115 A0E 626; 5 A0E 624, 5 A0E 626 Lemon yellow headlights will make your car more stylish and unique, making it stand out from the crowd. Replacement method: 1)Use a screwdriver to pry open the original chip. 2)After opening the original chip, there are traces of thermal conductive silicone on the top of the chip. According to the original traces on the back of our chips evenly coated with thermal conductive silicone. 3)Finally, snap on the original position, press to make it flat and wait for bonding. No programming is required, just normal installation and use. Note: Professional installation is recommended. Thermal adhesive and instructions are not included. Fitment:
BMW F97 LCI X3M F98 LCI X4M
G01 LCI X3 30eX 30i 30iX M40iX
G02 LCI X4 30iX M40iX

EUE Spec. :
FOR BMW X3 18d 20dX 20i 20iX 30dX 30eX 30iX M40dX M40iX;
FOR BMW X4 20dX 20iX 30dX 30iX M40dX M40iX;

USA Spec. :
BMW X3 30eX 30i 30iX M40iX X4 30iX M40iX

Manufacturer Part Number:
Left Side: 63115A0E623, 63115A0E625, 5A0E623, 5A0E625,63 11 5 A0E 623, 63 11 5 A0E 625, 5 A0E 623, 5 A0E 625;
Right Side: 63115A0E624, 63115A0E626, 5A0E624, 5A0E626, 63 115 A0E 624, 63 115 A0E 626; 5 A0E 624, 5 A0E 626

Replacement method:
1) Use a screwdriver to pry open the original chip (chips with fixing screws need to be opened in advance)
2) After opening the original chip, there are traces of thermal conductive silicone on the top of the chip. According to the original traces on the back of our chips evenly coated with thermal conductive silicone (LED chips must be coated with thermally conductive silicone underneath)
3) Snap on the original position, press to make it flat and wait for bonding. No programming is required, just normal installation and use.

Note:
1.Please check the description or use the year/make/model check finder and replace part numbers to confirm the compatibility before purchasing.
2.Professional installation is recommended. Thermal adhesive and instructions are not included.