Meet ASTM F1807 Combo Crimping Tool for 1/2-inch and 3/4-inch With high quality made from tool steel,come with GO NO GO Gauge Smart design help you reach into tight connection and make the pipe installation easier. Well polished jaws ensure no damage for copper ring and bring secure&reliable connection
IWISS F1807 1/2&3/4-inch Combo Copper Ring Crimping Tool for Pex Pipe Connection with free GO-NO-GO Gauge suits Sharkbite, Watts, Apollo and All US F1807 Standards
- Meet ASTM F1807
- Combo Crimping Tool for 1/2-inch and 3/4-inch
- Smart design help you reach into tight connection and make the pipe installation easier.
- Sharpen save 30% labor.
- Perfect Locator and Perfect polishing insure no damage for copper ring.
Simply pull back on the handles to open the jaws and crimp away.
What you will receive:
1* 1/2 & 3/4-inch Combo Crimping Tool
1* GO NO GO Gauge
Instrucion-How to use:
1.Pull back on the moving handle and open the jaws fully(Do not force the handles apart).
2.Position jaws squarely around the copper ring.
3.Gently let the handles open to close the jaws on the copper ring.
4.Squeeze handles together to complete to the crimp.(ONE CRIMP ONLY!)
5.Pull back on the moving handle to release jaws from the crimped ring.
6.Measure the crimped ring with GO-ON-GO Gauge(included).Do not measure bumps on the ring where the jaws meets.If GO on gauge does no fit, or if NO GO does fit,cut out the connection,replace the fitting and ring, adjust and calibrate the tool and recrimp.
IWISS F1807 1/2&3/4-inch Combo Copper Ring Crimping Tool for Pex Pipe Connection with free GO-NO-GO Gauge suits Sharkbite, Watts, Apollo and All US F1807 Standards
- Meet ASTM F1807
- Combo Crimping Tool for 1/2-inch and 3/4-inch
- Smart design help you reach into tight connection and make the pipe installation easier.
- Sharpen save 30% labor.
- Perfect Locator and Perfect polishing insure no damage for copper ring.
Simply pull back on the handles to open the jaws and crimp away.
What you will receive:
1* 1/2 & 3/4-inch Combo Crimping Tool
1* GO NO GO Gauge
Instrucion-How to use:
1.Pull back on the moving handle and open the jaws fully(Do not force the handles apart).
2.Position jaws squarely around the copper ring.
3.Gently let the handles open to close the jaws on the copper ring.
4.Squeeze handles together to complete to the crimp.(ONE CRIMP ONLY!)
5.Pull back on the moving handle to release jaws from the crimped ring.
6.Measure the crimped ring with GO-ON-GO Gauge(included).Do not measure bumps on the ring where the jaws meets.If GO on gauge does no fit, or if NO GO does fit,cut out the connection,replace the fitting and ring, adjust and calibrate the tool and recrimp.