【Application】for Honda Accord 10th generation 2018-2022 (CV1/CV2/CV3) without Active Damper System 【24 Rebound Force Levels】 This allows you the ability to perfectly dial in your coil-overs system. For nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff 【High Tensile Spring】Front: 8kg/mm(448lbs/in) & Rear: 8 kg/mm(448 lbs/in). Under 600,000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability and performance 【Adjustable Ride Height】 The height is adjustable for 1-3 inches(does not keep the original ride height), allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response 【Excellent Material】The product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation

Introduction

MXR-B3 is based on MXR-B2 coil-overs, which are also height adjustable. They are also made for street use, but the 24-level rebound damping control allows you the ability to perfectly dial in your coil-over setup. You will experience better ride quality in all road conditions.

Application

for Honda Accord 10th generation 2018-2022 (CV1/CV2/CV3) without Active Damper System

Specification

Front top mount: Standard rubber

Rear top mount: OE top mount required

Camber adjustable: Not available

Spring Rate Front: 8 kg/mm(448 lbs/in)

Spring Rate Rear: 8 kg/mm(448 lbs/in)

Spring length Front: 180 mm

Spring length Rear: 179 mm

Spring Preload advised: 7-10 mm
 

Package included

2 x Front coil-overs + 2 x Rear coil-overs + 1 x Allen wrench + 2 x C spanners

Feature

1. Lowered height adjustment from 25-75mm (depends on vehicle models)which allows a lower center of gravity and also add a more aggressive stance

2. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent

3. Adjustable Camber Plate and Pillow ball top mount for sharpening steering response.( for some models)

4. C NC machined Aluminum top mounts and lockers-- - excellent strength, and save weight

5. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable

6. High tensile spring--- 600,000 times continuously test to assure its high tensile strength.

7. All inserts come with fitted long rubber boots--- To protect the damper better and be durable.

8. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions

9. Corrosion Finish - Anodized Aluminum And Powder Coated Carbon Steel Parts