★Dash cam obd power cable is suitable for all type-c port electronic devices. Before purchasing, please confirm if the signal definition foot of your dash cam is A5-B5. If not, this OBD Power Cable does not support your dash cam. If you don't know what the signal definition foot of your dashcam is, you can first consult the seller who purchased the camera ★OBD Power Cable for Dash Cam Have Two Work Modes: One button operation for two work modes. 1, ACC mode, the obd power cable type c will power off after 5 minutes when your car ACC is off. 2, Surveillance working mode, keep working until it detects low battery voltage (11.6V), realize 24 hours parking monitoring. The "O" gear requires a delay of 20 minutes when car voltage is lower than 12.9V (±0.2) before powering off. The "O" gear requires a 5-minute delay when car voltage is lower than 11.6V. ★High Compatibility OBD Power Adapter for Dash Cam: OBD power cable for dash camera, Jeep Cherokee, Chevy, Toyota, Truck, etc. as long as you have OBD port. Specially designed for dash cam GPS navigator, DVR, radar detector and more Type-c usb port devices. It is type c obd power, please note it! ★Universal OBD and OBD2 Power Adapter: The obd2 obd power cable for dash camera plugs into your car stock OBD or OBD2 port directly. You don't need to take power from car battery or fuse box and cigarette lighters. This obd power cable provides you more security and convenience. ★Low Voltage Protecting OBD Power Adapter USB C: OBD2 dash cam power cable, which has a built-in intelligent program control chip with automatic battery voltage detection and low voltage protection, automatically cutting off the power output when the battery voltage is below 11.6V to ensure the vehicle can start normally. ★Only for Charging OBD Power Connector: Obtaining power from OBD interface only, no interference in other OBD data communication. Don't hesitate to buy it, we provide 100% satisfactory after-sales service. If you have any questions, please feel free to contact us, we will replace or issue a quick refund for you for free! Technical Specifications:

ACC mode Input: 13V-36V
Output: 5V/3A
Surveillance mode Input: 11.6V-36V
Output: 5V/3A
Extension cable: 3.5meters(11.5 ft) length
Interface: TYPE C USB (obd power adapter usb c)

One button for Two work modes:

Mode “O”:
ACC mode: When your car ACC is off, the OBD power cable will also power off after 20 minutes.
Mode “—”:
Surveillance mode: When you car ACC is off, the OBD power cable will keep working until detecting the car battery voltage is at 11.6V(low voltage), it will power off after 30 seconds
The low voltage protection for mode “—” protect your car from running out the battery, enable you have enough voltage to start the car for next driving.

Attention:

1.Please note that the car OBD, OBD2 power cable is only working for dash cams which range from 8V-36V,other voltage range is not supported. The voltage will be converted to 5V output.
2.This car charger adapter is suitable for 16pin OBD and OBD2 ports. It is only used for charging.