Brooks

product_img5
Brooks AG Parts
Brooks AG Parts Replacement Gearbox for Skid Steer Rotary Cutter 1:1.93 Ratio Smooth Input Shaft
Replacement 40 hp. gearbox 1:1.93 Speed up ratio gearbox with a 1-3/8" smooth input shaft with 1/2" shear bolt hole and circlip groove, 1.57" X 12 tapered spline output shaft and 1:1.93 speed up ratio. These are used on many of the Domestic and Imported Skid Steer Mowers currently being sold in the ...
$255.00
www.amazon.com
product_img5
Brooks AG Parts
Brooks AG Parts Aftermarket Replacement Set of Three (3) Oregon Gator G3 High Lift Mulching Blades for 52inch Simplicity 18inch X 5/8inch Hole
Aftermarket Replacement Set of three (3) Oregon G3 Gator Style blades that Are Compatible With 52" Simplicity mowers with 18" blades and 5/8" Center mounting holes, Equipped with X-Tended Cutting Length to improve cutting efficiency and have up to twice the cutting length. Great for Mulching. Replac...
$46.97
www.amazon.com
product_img5
Brooks AG Parts
Brooks AG Parts Disc Bearing Cap, Fits 7-7/16" Ribbed Spools, 28211, CFG-2, 118-2002, Cast Steel, Grease Lubricated
Replacement cast steel bearing cap for most disc harrows with 1" square axles and 7-7/16" ribbed spools. Listing is for one cast steel bearing cap with grease fitting installed with four (4) grooves, two inner grooves are 1-1/2" apart and 2 outside groves are 4" apart. Bolt hole spacing is 3" on cen...
$31.99
www.amazon.com
product_img5
Brooks AG Parts
Brooks AG Parts Set of Three (3) Blade Mounting Bolts with Washers Compatible Replacement for King Kutter Code 502310. Fits RFM Series Finish Mowers,
These are 1/2" Left Hand Fine Thread Blade Mounting Bolts for King Kutter Finish Mowers Fits 4', 5;, 6; and 7' cut mowers Set of Three (3) Blade Mounting Bolts with Washers Compatible Replacement for King Kutter Code 502310. Fits RFM Series Finish Mowers. These are 1/2" Left Hand Fine Thread Blade M...
$23.10
www.amazon.com
product_img5
Brooks AG Parts
Brooks AG Parts 2 Tines for Land Pride RTA12 Series Tiller, 1 Each RH/LH, 820-329C / 820-330C
Replace your worn tiller tines with these Boron Steel Italian made replacement tines for Land Pride RTA 12 Series Tillers equipped with 4 tines per rotor flange. This listing is for one complete set of tines, a total of 2 tines, one (1) each left hand and right hand. Fits: RTA12 Series tillers that ...
$34.99
www.amazon.com
product_img5
AJC
AJC Battery Compatible with Brooks Straight 12V 7Ah Stairlift Battery
This is an AJC Brand Replacement for a Brooks Straight 12V 7Ah Stairlift Battery Voltage: 12V (12 Volts) Capacity: 7Ah Terminals: F1 Number of Batteries Required for a Full Replacement: 2 Battery is compatible with these Brands: Brooks. IMPORTANT: You MUST RE-USE: your existing cabling and hardware....
$28.99
www.amazon.com
product_img5
Brooks Instrument
Key Instruments 10 to 100 scfh Variable Area Flowmeter - 2520A4A34BVBN
Item:-Flowmeter Type:-Variable Area Max. Pressure (PSI):-100 Connection Size (In.):-1/8 FNPT Max. Temp. (F):-150

Specifications:

  • Item:-Flowmeter
  • Type:-Variable Area
  • Max. Pressure (PSI):-100
  • Connection Size (In.):-1/8 FNPT
  • Max. Temp. (F):-150
  • ...
$252.38
www.amazon.com
product_img5
Brooks AG Parts
Output Seal Compatible Replacement for King Kutter 156005, Fits Output Shafts of 40 Hp Gearboxes
Replacement output seal for 40hp King Kutter Rotary Cutter gearboxes. Replacement Seal for King Kutter Rotary Cutters and Finish Mowers fitter with a 40hp gearbox. Fits 1.57 inch diameter output shafts with 12 tapered Splines...
$16.75
www.amazon.com
product_img5
Brooks AG Parts
Set of Two Blades for Code HL-422N for Howse Implement 6' Rotary Cutters
Heat Treated Forges Steel 28" Length, 3-1/2" Width, 1/2" Thick, 1-1/2" Round Mounting Hole, 3" offset Cuts Counter Clockwise Rotation Set of Two (2) Blades One set of Replacement blades for Howse Brand rotary cutters code HL-422N, Fits Howse 6' Rotary Cutters This listing is for one set of two repla...
$165.80
www.amazon.com
product_img5
Brooks AG Parts
Aftermarket 54" Cut Blades Compatible with Kubota Blades, Set of 3, Code 76529-34330 or 70000-25004 RC54-24B
Set of three (3) replacement aftermarket USA made blades Compatible With Kubota models equipped with a 54" cut mower Blade specifications as follows: Overall Length: 18-11/16" Width: 2-1/2" Thickness: 0.240" Mounting Hole: 1-1/8" Fits Models: RC54-24B RK54-71B RC54-B RC54-FZ21 RC54-G20 RC54-G19 RCK5...
$82.50
www.amazon.com
product_img5
Brooks AG Parts
New Gearbox Compatible Replacement for John Deere Code DE19028 / DE19767 fits MX7 & MX8 Rotary Cutters with Iberica (Spanish) gearboxes. These
Fits MX7 and MX8 (Both Left and Right Hand Side on MX8) mowers that use a bolt to mount the blade carrier to the gearbox, will not fit mowers that use a castle nut to mount the blade carrier. 1:1.46 Speed Up Ratio (22 tooth input gear and 15 tooth output gear) High Speed Tapered Roller Bearings and ...
$1620.00
www.amazon.com
product_img5
Brooks AG Parts
Smooth Imput Gearbox Compatible Replacement for Land Pride Codes 826-026C, 826-383C, 826-670C and 826-867C.
1-3/8" Round Imput shaft with hole for 1/2" shear bolt (shear bolt not included) and a 1.57 inch 12 spline bottom shaft Faster gear ratio of 1:1.93 turns 30% faster than 1:1.47 gearboxes providing faster blade tip speed which helps when cutting grass. Includes the blade carrier mounting nut and cott...
$255.00
www.amazon.com
product_img5
Brooks AG Parts
New Replacement Gearbox Compatible Replacement for John Deere AFH216263, Fits MX5 and MX6 Rotary Cutters. Direct Bolt On Replacement for The Late
Will only fit MX5 and MX6 mowersthat use a gearbox that uses a castle nut to mount the blade carrier, will not fit models that use a bolt to mount the blade carrier 1-3/8" Diameter by 21 Spline Input Shaft and a 1.97" by 15 spline output shaft Bolt Pattern (4) 3/4" Mounting Holes on a 8" Bolt Circle...
$1590.00
www.amazon.com
product_img5
Brooks AG Parts
Tiller Tine Bolt Kit, 12 Bolts, Nuts and Washers, to Mount 6 Tines Compatible with Agric
Listing is for six (6) sets of tine bolts with washers and nuts, a total of twelve (12) bolt/nut/washer, enough to mount six(6) tines for a AL, ALJ, AF, AFMD, AFM, AFMJ, AM, AMS, AMSE series Agric Bemvig Rotocultivators. These bolts are 7/16" X 1.50" Part Numbers: 321-AM, 322-AM, 323-AM Listing is f...
$24.95
www.amazon.com
product_img5
Brooks AG Parts
One Aftermarket Replacement Gearbox Compatible/Replacement for IM402, IM502 High Speed 1:1.93 Ratio.
One Aftermarket Replacement Gearbox Compatible/Replacement for IM402, IM502 High Speed 1:1.93 Ratio. 40hp rated, 1-3/8"-6 spline input shaft, 1.57" X 12 tapered spline output shaft and 1:1.93 speed up ratio. These gearboxes can have a square housing configuration and are identical in mounting to the...
$255.00
www.amazon.com
product_img5
Brooks AG Parts
Aftermarket Tedder Tines Compatible with Sitrex Tedder Tines Codes 200.401, 210.574 and 0300116 Set of 6 Also Fits H&S, M&W PT207, PT407, PT407H,
Aftermarket Replacement tine Compatible with Sitrex Hay Tedders. This listing is for six (6) replacement tedder tines. Hay Tedder tines are made from high quality spring steel to ensure long life and correct fitment. Aftermarket Replacement tine Compatible with Sitrex Hay Tedders. This listing is fo...
$117.50
www.amazon.com
product_img5
Brooks AG Parts
Six Quarts 00" Grade Pourable Grease for Gearboxes and Tiller Drives (6)
For differentials, transmissions and gearboxes with "00" grade lubricant requirements. Great for applications with increased risk of seal failure. Factory grade lube in many roto-cultivators (tillers) Six 32 Oz (quart) bottles "00" grade grease with easy to pour gear lube spout. Listing is for six q...
$142.50
www.amazon.com
product_img5
Brooks AG Parts
Blade Mounting Bolt Compatible Replacement for Land Pride Code 802 695C.
1/2"-20 X 2" Grade 8 Flange Bolt Fits Many of the Land Pride Finish Mowers Replacement Finish Mower Blade Mounting Bolt. Fits the following Finish Mowers: Fits: AFM4011 and AFM40133 AFM4014 and AFM4016 and AFM40200 AFM4211 AFM4214 AFM4216 AT2560 AT2572 AT2584 AT2660 AT2672 AT2684 FD1548 FD2560 FD257...
$10.90
www.amazon.com
product_img5
Azzota
960 Units FLUIDX 96-Format TRI-Coded Tube, 1.0ML External Thread, FLUIDX 68-1003-11
FluidX 96-format, 1.0ml External Thread Next-Gen Jacket Tri-coded Tube 2D Code on base, 1D Linear Barcode and Human Readable Number on the side Capped, racked; 10 racks/960 tubes Equivalent to Brooks Life Sciences FluidX 68-1003-11, 68-1003-10 FluidX 96-format, 1.0ml External Thread, Next-Gen Jacket...
$1080.00
www.amazon.com
product_img5
Exell Battery
(2-Pack) Emergency/Exit Lighting Battery Fits and Replaces Dual-Lite CV3REW Kaufel 850.0061 FX2E FC2E 0120822 LXURWE CVD2REW SCSRWE CVD2REBN DL012-
REPLACES: Lithonia 100003A097, ANIC0865, BEL-7, CUSTOM-7, Chloride 100-003-A093, Chloride 100-003-A095, Chloride 100003A099 BATTERY TYPE: This battery is designed for emergency lighting that is used in many office buildings, apartments, and schools to guide toward an emergency exit. Be prepared for ...
$17.95
www.amazon.com